Instructions
11 ENGLISH
Locking or unlocking the caster
Fig.8: 1. Caster 2. Stopper lever 3. FREE position
4. LOCK position
Locking the caster is convenient when storing the
cleaner, stopping the work on the way and keeping the
cleaner still.
To operate the stopper, move it by hand.
To lock the caster with a stopper, lower the stopper
lever and the caster no longer will rotate. To release the
caster from the locked position, raise the stopper lever.
NOTE: When moving the cleaner, make sure that
the caster is unlocked. Moving the cleaner with the
caster in the locked position may cause damage to
the caster.
Carriage handle
When carrying the cleaner, carry it by holding the han
dle on the head. The handle is retractable at the head
when not in use.
Fig.9
ASSEMBLY
CAUTION: Always be sure that the tool is
before carrying out any work on the tool.
CAUTION: Always wear dust mask during
assembly or maintenance.
Optional accessory
CAUTION: Never pick up water or other liq-
breakage.
1.
bolts.
Fig.10: 1. Float 2. Float cage
2.
mounting position markings.
3.
position markings.
4. Mount the tank cover and lock it.
Fig.11: 1. Tank cover 2.
3. Damper 4.5. Tank 6. Mounting
position marking
NOTICE:
It
Optional accessory
NOTICE: Never pick up water or wet dust without
NOTICE: For picking up wet dust, make sure that
cleaner.
NOTICE:
tank, set it tight at the opening of the tank so
tion marking with the one on the tank.
Fig.12: 1.2. Tank 3. Mounting position
marking
NOTE:
picking up large amount of water repeatedly.
Otherwise vacuum ability may be reduced in case of
Installing the paper pack
Optional accessory
WARNING: Before using the paper pack,
together.
together may cause unusual noise and heat, resulting
NOTICE: Never pick up water or other liquids or
wet dusts when using the paper pack. Picking up
such things may cause the paper pack breakage.
NOTICE:
the tank cover.
NOTICE:
together.
1. Remove the rubber holder.
Fig.13: 1. Rubber holder
2. Extend the paper pack.
3. Align the paper pack opening with the dust suction
opening of the cleaner.
4. Insert the cardboard part of the paper pack onto
the holder so that it is positioned at the end beyond the
detent protrusion.
Fig.14: 1. Paper pack 2. Holder