Instruction Manual
Table Of Contents
- Specifications
- Symbols
- Intended Use
- Laser Beam Related Safety Standards
- Safety Declaration
- Radio Standards
- Déclaration sur la sécurité
- Normes radioélectriques
- Safety Warnings
- Important Safety Instructions for Battery Cartridge
- Names of Parts
- Standard Accessories
- Optional Accessories
- Battery
- Installing or Removing Battery Cartridge
- Using the Wall Scanner
- Settings
- Operation
- Protection System
- Maintenance
17
WARNING - Additional safety
1. Use the correct accessories. Use only accessories recommended
in this User's Manual and in Makita catalogs. Do not use other
accessories since this might result in malfunction, accident or injury.
2. Check for no damaged parts.
• Prior to use, fully inspect the product to check for no damage or breakage
and see if it can properly operate and can give required functionalities. If
abnormality is found, correct it before using it.
• To change or repair parts, follow the instruction manual. For the repair work not
mentioned in the instruction manual, contact the store of your purchase or a
Makita sales ofce to make a repair request. For switch malfunctions, contact
the store of your purchase or a Makita sales ofce to make a repair request.
• When abnormality or malfunction is found, stop using the product immediately.
Continued use may result in smoke, ignition, electric sock and/or injury.
<Abnormality and malfunction examples>
• The product or battery is abnormally hot.
• The product or battery has a deep scratch or deformation.
• There is a smell of burning.
• Electricity is sensed tinglingly.
• If the product has a malfunction such as non-operation even if switched on,
immediately remove the battery and contact the store of your purchase or a
Makita sales ofce to make inspection and repair requests.