Instruction Manual
Table Of Contents
- Specifications
- Symbols
- Intended Use
- Laser Beam Related Safety Standards
- Safety Declaration
- Radio Standards
- Déclaration sur la sécurité
- Normes radioélectriques
- Safety Warnings
- Important Safety Instructions for Battery Cartridge
- Names of Parts
- Standard Accessories
- Optional Accessories
- Battery
- Installing or Removing Battery Cartridge
- Using the Wall Scanner
- Settings
- Operation
- Protection System
- Maintenance
37
List of settings
Setting
icon
Description Setting option
Factory
default
Light
Selects “ON” or “OFF” for the
light to see scan surfaces in dark
places.
ON
OFF
ON
Laser
Selects “ON” or “OFF” for the
laser to see the "sensor's right
and left edge lines" provided at
the sensor's right and left sides
on the sensor scan surface. (See
page 51.)
ON
OFF
ON
Speaker
Adjusts the volume of the
signaling sound emitted when an
operation button is operated or
when there is an object detected
in the scanner's sensor area.
(Off)
(Low)
(High)
(High)
Bright.
Adjusts the brightness of the
display backlight.
(Low)
(Middle)
(High)
(Middle)
Sleep
Sets the period of time elapsed
before the display backlight,
guide laser and light are turned
off when the scanner is switched
on and no operation takes place.
OFF(*1)
10 sec.
20 sec.
30 sec.
60 sec.
120 sec.
240 sec.
240 sec.
Off Timer
Sets the period of time elapsed
before the display backlight,
guide laser and light are turned
off when the scanner is switched
on and no operation takes place.
OFF(*2)
1 min.
3 min.
5 min.
10 min.
5 min.
Settings