Instruction Manual
Table Of Contents
- Specifications
- Symbols
- Intended Use
- Laser Beam Related Safety Standards
- Safety Declaration
- Radio Standards
- Déclaration sur la sécurité
- Normes radioélectriques
- Safety Warnings
- Important Safety Instructions for Battery Cartridge
- Names of Parts
- Standard Accessories
- Optional Accessories
- Battery
- Installing or Removing Battery Cartridge
- Using the Wall Scanner
- Settings
- Operation
- Protection System
- Maintenance
51
To scan better
Before scan operation
• Remove dirt, dust or iron powder, if any, on the surface to be scanned.
• Scans cannot be done correctly if the surface to be scanned is wet. Make
sure the surface is dry.
• If the surface to be scanned has large projections, they may interfere with
the scanner's scan operation.
To scan more accurately
• If masking tape or such is used on
the scanning path, it serves as a
scanning aid, for example, by giving
you a guide mark to help you move
the scanner more accurately or
giving a guide mark when you make
markings for the estimated locations
of buried objects.
• The illumination of the guide laser
helps you scan correctly by giving
you a guide mark to move the
scanner straight.
1. Masking tape
2. Guide laser
Operation in dark places
Turn on the light when you scan in dark
places.
1
2
Operation