Replacement Part List

___

Reparaturanleitung PS-4600 / PS-5000 9

Repair manual DCS3500 / DCS3501 / DCS4300 / DCS4301 / EA3500F / EA3501F / EA4300F / EA4301F / MEA3500L / MEA3500M / MEA4300G / MEA4300L

CLUTCH DRUM AND CHAIN SPROCKET

Remove the sprocket guard, bar, and chain.

Remove the circlip 4 with the universal

wrench.

Remove cup washer 3.

Pull the handguard towards the front grip only

as far as necessary so the clutch drum can be

removed.

Clutch drum with sprocket and needle

bearing

Check the chain sprocket 2 for damage and

wear.

Important customer information:

Before installing a new saw chain, always

check the condition of the chain sprocket. A

worn chain sprocket will damage a new saw

chain, and must be replaced.

Check the clutch drum needle bearing for

wear and damage.

Assembly the bearing with multi

-purpose high-

performance grease (944.360.000).

Check the inside of the clutch drum for

damage and wear.

Replace the clutch drum if damaged or worn.

Note: Always use a new circlip 4

(927.408.000)!

When assembling the clutch drum, make

sure that the lug of the oil pump drive 1 is

not positioned on the oil pump drive.

When

inserting, turn the clutch drum slightly.