Use and Care Manual

38
EU Conformity Declaration
The undersigned, Tomoyasu Kato, as authorized by MAKITA Corporation, declare that the MAKITA machines,
Type: 194, 195
Chain saw EU prototype test certiÞ cate No.
EA3500F (194) M6T 09 10 24243 106
EA3501F (194) M6T 09 10 24243 106
EA4300F (195) M6T 09 10 24243 106
EA4301F (195) M6T 09 10 24243 106
manufactured by MAKITA Corporation, 3-11-8 Sumiyoshi-Cho, Anjo, Aichi, 446-8502 Japan, conforms to the basic safety and health
requirements of the applicable EU Directives:
EU Machinery Directive 2006/42/EG.
EU EMC Directive 2004/108/EG.
Outdoor Noise Directive 2000/14/EG.
The most important standards applied to properly meet the requirements of the above EU Directive were: EN 11681-1, EN ISO
14982, CISPR 12.
The conformity assessment procedure 2000/14/EG was performed per Annex V. The measured noise level (L
wa
) is 111,7 dB(A). The
guaranteed noise level (L
d
) is 113 dB(A).
The EU Type-Examination CertiÞ cate was performed by: TÜV Product Service GmbH, ZertiÞ zierstelle, Ridlerstr. 31, D-80339
Munich.
The technical documentation is on Þ le at MAKITA International Europe Ltd., Michigan Drive, Tongwell, Milton Keynes, Bucks, MK15
8JD, England.
Anjo, 4.11.2009
For MAKITA Corporation
Tomoyasu Kato
Managing Director