Troubleshooting Guide

10
Secure the chain saw from slipping (vise).
Using the disassembly hook (Chap. 00, Pos.
14), disengage the brake band spring 3.
Remove the handguard and
disengagement mechanism
Remove the hood.
Unscrew bolt 4 and pull out the sleeve 5.
Remove the black spacer 6.
6
4 5
1
2
3
03
CHAIN BR
AKE / GUIDE BAR BOLT
Removing the brake band
CAUTION: To prevent cuts, wear protective
gloves and remove the spike bar (2 bolts)!
Remove the sprocket guard, bar, and chain.
Pull the handguard towards the front handle to
release the chain brake.
Remove the clutch drum, see Chapter 02.
Push the hand guard forward to engage the
chain brake. This tensions the brake band
spring.
Remove the cover plate, see Chapter 01.
Fold the brake band 1 upward and turn it out
of the disengagement mechanism 2.