Troubleshooting Guide

31
14
TORQUES
Fastener Part No. Size Qty. Torque
Crankcase sides
Cylinder on crankcase
Carburetor bottom on crankcase
Muffler on cylinder
Sheet-metal plate mounting on muffler
Sheet-metal plate mounting on crankcase
magnet side
Carburetor / intake manifold in carburetor flange
Intake manifold on carburetor bottom
Carburetor flange on carburetor bottom
Oil pump mounting on crankcase
Clutch to crankshaft
Transmission cover on crankcase
Mounting bolt in bar flange
Sprocket guard mounting
Chain brake cover
Ignition mounting in crankcase
Flywheel nut fastening
Impact protection mounting, cylinder side
Impact protection mounting, magnet side
Cable drum fastening in starter housing
Starter housing to crankcase
Handguard bearing on magnet side
Grip shell / rear handle on tank
Front handle on tank, side
Front handle on tank, bottom
Front handle side cover on tank
Damping spring fastening on cylinder
Damping spring / tank, mag. side rear
Damping spring / tank, cyl. side front
Damping spring cylinder / handle side cover
Damping spring / crankcase, mag. side
Damping spring / crankcase, cyl. side
Spike bar mounting on crankcase
Decomp. valve on cylinder (where present)
Spark plug
Handle heating generator mounting
Handle heating short-circuit wire
Kabelführung / Kraftstofftank
908.905.205
908.405.205
908.905.205
908.905.205
908.005.095
908.905.165
908.505.555
913.455.164
928.405.000
913.455.164
908.905.165
---
908.905.165
905.808.205
923.208.004
913.850.155
908.905.205
920.308.024
908.905.205
908.905.205
913.455.204
908.905.205
908.905.205
913.455.204
913.455.204
913.455.164
913.455.204
908.005.205
913.455.254
913.455.254
908.006.205
908.006.205
908.006.205
908.905.165
001.131.150
965.603.021
901.504.127
901.504.127
M 5 x 20 Torx
M 5 x 20 Torx with lock teeth
M 5 x 20 Torx
M 5 x 20 Torx
M 5 x 9 Torx with lock teeth
M 5 x 16 Torx
M 5 x 55 Torx with lock teeth
M 5.5 x 16 Torx
M 5.5 x 16 Torx
M 5 x16 Torx
M 12 x 1 L with assembly wrench for centrifugal clutch
M 5 x16 Torx
M 8, screw in to dimension 20.5 +/-0.5
M 8, A/F 13, 6KT nut with flange
M 5 x 15 Torx
M 5 x 20 Torx
M 8 x 1 / A/F 13
M 5 x 20 Torx
M 5 x 20 Torx
M 5.5 x 20 Torx
M 5 x 20 Torx
M 5 x 20 Torx
M 5.5 x 20 Torx
M 5.5 x 20 Torx
M 5.5 x 16 Torx
M 5.5 x 20 Torx
M 5 x 20 Torx, included in damping spring
M 5.5 x 25 Torx, part of spring
M 5.5 x 25 Torx, part of spring
M 6 x 20 Torx with lock teeth
M 6 x 20 Torx with lock teeth
M 6 x 20 Torx with lock teeth
M 5 x 16 Torx
M 10 x 1 / A/F 13
M 14 x 1.25 / A/F 19
M 4 x 12
M 4 x 12
3.5 x 9.5
6 x
4 x
4 x
2 x
2 x
1 x
2 x
1 x
2 x
1 x
1 x
1 x
2 x
2 x
3 x
2 x
1 x
1 x
1 x
1 x
4 x
1 x
1 x
1 x
2 x
1 x
1 x
1 x
1 x
1 x
1 x
1 x
2 x
1 x
1 x
3 x
1 x
1 x
9.5 -0.5
12 +/-0.5
5 +/-0.5
9.5 +/-0.5
7 +/-0.5
7 +/-0.5
2.5 +/- 0.25
4 +/-0.5 (with spring washer)
4 +/-0.5
5 +/-0.5
35 +/-2.5
5 +/-0.5
-
1.5 +/-0.5
5 +/-0.5
8 +/-0.5
25 +/-1
5 +/-0.5
5 +/-0.5
4.5 +/-0.5
6.5 +/-0.5
6.5 +/-0.5
3.5 -0.5
5 -0.5
5 -0.5
5 -0.5
5 +0.5
5 -0.5
5 -0.5
5 +/-0.5
5 +/-0.5
5 +/-0.5
7 +/-0.5
8 +0.5
25 +/-5
2.5 +/-0.25
2.5 +/-0.25
0.7 +/-0.1