Use and Care Manual
11
ENGLISH
1
2
► 1. Long/short pipe 2. Blower nozzle
6. Make sure all clamps are tight. Check if the
trottle valve moves correctly along with the throt-
tle movement.
If the throttle cannot be fully pulled or the throttle
does not return to the correct position, refer to
the MAINTENANCE section for throttle valve
adjustment.
BEFORE STARTING THE
ENGINE
Checking and rell of engine oil
CAUTION: When relling with engine
oil, stop the engine and wait for the engine
to cool down. Otherwise skin burn may result.
NOTICE: Use of deteriorated oil will cause
irregular start-up.
NOTICE: Remove dust or dirt near the oil
rell port before detaching the oil cap. Also,
keep the detached oil cap free of sand or
dust. Otherwise, any sand or dust adhering to
the oil cap may cause irregular oil circulation
or wear on the engine parts, which will result in
troubles.
1
2
► 1. Upper limit mark 2. Lower limit mark
Inspection
Put the blower on a at surface and remove the
oil cap.
Make sure that the oil level is within the upper
and lower limit marks. If the oil is not up to the
lower limit, ll up with new oil.
Change the oil whenever it becomes dirty or
signicantly changes color. (Refer to “Replacing
engine oil” for the oil change procedure and
frequency.)