Use and Care Manual

2
3
1
► 1. Swivel pipe 2. Flexible pipe 3. Hose band
2. Loosen and remove the clamp screw.
1
► 1. Clamp screw
3. Install the control handle / handle assembly onto the swivel pipe
and tighten them with the clamp screw.
2
1
► 1. Control handle / handle assembly 2. Clamp screw
4. Attach the exible pipe to the elbow
For tube throttle model: Insert the elbow to the exible pipe. Attach
the cable holder between the hose band and the exible pipe. Tighten
the cable holder, exible pipe and elbow with the hose band. Set the
control cable onto the cable holder, and close the cable holder.
1
3
2
► 1. Elbow 2. Cable holder 3. Hose band
2
1
► 1. Cable holder 2. Control cable
For hip throttle model: Insert the elbow to the exible pipe. Tighten
the exible pipe and the elbow with the hose band.
5. Attach the long/short pipe to the swivel pipe. Turn the long/short
pipe clockwise to lock it into place. Then attach the blower nozzle with
the long/short pipe. Turn the blower nozzle clockwise to lock it into
place.
1
2
► 1. Long/short pipe 2. Blower nozzle
6. Make sure all clamps are tight.
7 ENGLISH