Operation Manual
5
EN
FR
DE
NL
ES
IT
PT
GR
NO
SE
FI
DK
RU
2. COMPONENTS 3. PRE-OPERATION CHECKS
(See Fig. ) (See Fig. )
NOTE
Please refer to the illustrations on the back page
of the front cover or back cover for Fig. to
indicated in the sentence.
EG241A, EG321A, EG321AE,
EG441A, EG441AE (See Fig. -①)
❶ RECOIL STARTER
❷ RECOIL STARTER HANDLE
❸ FUEL STRAINER (FUEL VALVE)
❹ FUEL TANK
❺ ENGINE SWITCH
❻ CONTROL PANEL
❼ OIL GAUGE (OIL FILLER)
❽ OIL DRAIN PLUG
❾ FUEL GAUGE
TANK CAP
SPARK PLUG CAP
CHOKE LEVER
AIR CLEANER
EXHAUST OUTLET
MUFFLER COVER
EG601A, EG601AE, EG671A, EG671AE
(See Fig. -②)
❶ RECOIL STARTER
❷ RECOIL STARTER HANDLE
❸ FUEL STRAINER (FUEL VALVE)
❹ TANK CAP
❺ ENGINE SWITCH
❻ CONTROL PANEL
❼ OIL GAUGE (OIL FILLER)
❽ OIL DRAIN PLUG
❾ FUEL TANK
FUEL GAUGE
CHOKE LEVER
SPARK PLUG CAP
AIR CLEANER
MUFFLER
EXHAUST OUTLET
1. CHECK ENGINE OIL (See Fig. -①,②)
Before checking or re lling oil, be sure generator is
located on stable and level surface with engine
stopped.
Remove oil ller cap and check the engine oil level.
(See Fig.-①)
❶ OIL GAUGE
❷ OIL FILLER
❸ UPPER LEVEL
❹ LOWER LEVEL
If oil level is below the lower level line, re ll with
suitable oil (see table) to upper level line. Do not
screw in the oil ller cap when checking oil level.
(See Fig.-②)
❶ UPPER LEVEL
❷ LOWER LEVEL
Change oil if contaminated.
(See “How-To” Maintenance.)
Oil capacity (Upper level) : (L)
EG241A . . . . . . . . . . . . . . . . . . . . . . . . 0.6
EG321A, EG321AE . . . . . . . . . . . . . . 0.6
EG441A, EG441AE . . . . . . . . . . . . . . 1.0
EG601A, EG601AE . . . . . . . . . . . . . . 1.2
EG671A, EG671AE . . . . . . . . . . . . . . 1.2
Recommended engine oil:
Use 4-stroke automotive detergent oil of API service class
SE or highergrade (SG, SH or SJ is recommended).
SAE 10W-30 or 10W-40 is recommended for general,
all-temperature use.
If single viscosity oil is used, select the appropriate
viscosity for the average temperature in your area.
Ambient
temperature
Single grade
Multigrade
5W
10W
20W
#20
#30
#40
10W
-
30
10W
-
40