Service manual

a. Removal'of Engine and Machine Body
For EH561
1. StarVStop lead wire
Remove lead wire connecting rear-handle stop
switch with engine.
2. Throttle wire
Remove cable holder fixed to rear handle by
loosening screw (M4 x
10).
Remove throttle wire from throttle lever parts.
Cable holder
3. Engine
Remove engine by loosening
two bolts (M6 x 15, PW, SW) with fixing case and engine and one bolt (M6 x 40,
W, SW) with combine rear handle with case and engine.
4. Rear handle
Loosen bolt (M6 x
50, W, SW) on case side and
remove rear handle.
5. Front handle
Loosen bolt (M6 x
35, SW) with fixing case and front handle and remove front handle.
10