User Manual

31
Extract from the spare parts list
Use only original MAKITA parts. For repairs and
replacement of other parts, see your MAKITA service centre.
EK7300
EK7301
EK8100
Pos. MAKITA-No. Qty. Denomination
Synthetic resin cutting disc
1 966 121 150 1 Cutting disc for steel, dia. 300/20 mm
966 141 150 1 Cutting disc for steel, dia. 350/20 mm
966 144 150 1 Cutting disc for steel, dia. 350/25,4 mm
966 161 050 1 Cutting disc for steel, dia. 400/20 mm
1 966 121 120 1 Cutting disc for masonry, dia. 300/20 mm
966 141 120 1 Cutting disc for masonry, dia. 350/20 mm
966 144 120 1 Cutting disc for masonry, dia. 350/25,4 mm
966 161 120 1 Cutting disc for masonry, dia. 400/20 mm
3 994 280 250 1 Hex screw M8x25
4 965 300 470 1 V-belt (for EK7300, EK7301)
4a 965 300 481 1 V-belt (for EK8100)
5 963 601 122 1 Suction head
6 181 114 202 1 Tank cap, compl. (fuel)
8 395 173 020 1 Inner Þ lter
9 395 173 011 1 Air Þ lter insert (paper cartridge)
10 395 173 081 1 Pre-Þ lter (foam)
11 965 603 021 1 Spark plug
12 122 164 010 1 Starter cable ø 4,0x1000 mm
13 001 161 020 1 Starter grip
14 181 163 050 1 Return spring in housing
15 923 208 004 2 Hexagonal nut M8
16 941 719 140 1 Universal wrench SW 13/19
17 940 827 000 1 Offset screwdriver T27
18 944 340 001 1 Screwdriver (carburetor)
19 395 174 140 1 Spark arrester screen
Accessories (not delivered with the Power Cut)
Diamond cutting disc
22 966 . . . . . . 1 Please consult your MAKITA dealer!
- 394 228 121 1 Adapter ring, dia. 20/25,4 mm
24 957 114 200 1 Angle fuel-tank Þ ller neck, cpl.
25 394 369 600 1 Guide trolley DT2010 cpl.
26 957 802 600 1 Pressure water tank, cpl.
27 394 365 102 1 Mains water connection, cpl.
28 394 114 271 1 Stand with rollers, complete
(included only with EK8100, but without items 29, 30, 31)
29 394 114 240 2 Bushing
30 394 114 230 2 Roller
31 908 006 355 2 Star-head screw
32 908 905 165 4 Star-head screw
- 949 000 035 1 Combined can (for 5l fuel, 2.5l oil)
EU Conformity Declaration
The undersigned, Tomoyasu Kato, as authorized by MAKITA Corporation, declare that the MAKITA machines,
Type: 395, 328
Power Cut EK7300, EK7301 (395), EK8100 (328)
manufactured by MAKITA Corporation, 3-11-8 Sumiyoshi-Cho, Anjo, Aichi, 446-8502 Japan, conforms to the basic safety and health
requirements of the applicable EU Directives:
EU Machinery Directive 2006/42/EG, EU EMC Directive 2004/108/ EG, Outdoor Noise Directive 2000/14/EG.
The most important standards applied to properly meet the requirements of the above EU Directive were: EN 19432, CISPR 12, EN
ISO 14982, DIN EN 61000-4. The conformity assessment procedure 2000/14/EG was performed per Annex V. The measured noise
level (L
wa
) is 114 dB(A). The guaranteed noise level (L
d
) is 115 dB(A).
The technical documentation is on Þ le at MAKITA International Europe Ltd., Michigan Drive, Tongwell, Milton Keynes, Bucks, MK15
8JD, England.
Anjo, 1.10.2012 for MAKITA Corporation
Tomoyasu Kato
Managing Director