Specifications

Repair

[4] DISASSEMBLY/ASSEMBLY

[4]-5. Clutch

DISASSEMBLING

ASSEMBLING

Note: (1) Clutch can be easily removed with Impact driver

without holding the piston.

(2) Do not remove Spark plug as compressed air resistance

has to be used for the disassembling.

(3) Plug cap with Plug cap spring has to be removed from

Spark plug.

• Loosen two M6x25 shoulder hex bolts by turning each bolt

counterclockwise using Cordless impact driver with 13mm Socket bit.

(Fig. 22)

(1) Remove Clutch case section from the engine.

(2) Remove Retaining ring S-12 with 1R004 from clutch case section.

(3) Remove Clutch drum from Clutch case section with Arbor press. (Fig. 26)

(1) Put Clutch case on the table of Arbor press vertically, then pressfit Clutch drum into

Ball bearing 6201LLU with 1R286 and Arbor press as drawn in Fig. 27..

(2) Set Retaining ring S-12 in place with 1R004.

ASSEMBLING

• Because M6x25 shoulder hex bolt (2pcs.) has the stepped shape. First tighten it by hand (Fig. 23),

next use cordless impact driver. (Fig. 24)

Note: Face the marking of L to the outside as drawn in Fig. 25.

Turn two M6x25 shoulder hex bolts clockwise using Cordless impact driver with 13mm Socket bit. (Fig. 25)

Fig. 22

Fig. 23

Fig. 26

Fig. 27

Fig. 24 Fig. 25

Clutch case

1R247

Arbor press

Clutch drum

1R286

Clutch case

13mm Socket bit

M6x25 shoulder

hex bolt (2pcs.)

[4]-6. Clutch drum

P 6/ 14