Operators Manual
2
ENGLISH (Original instructions)
SPECIFICATIONS
Model FS4000
FS4000X
FS4200
FS4300/
FS4300A
FS4300X
FS6200
FS6300/
FS6300A
FS6300R FS6300X
Self drilling
screw
6 mm -
Capacities
Drywall
screw
5 mm 4 mm
No load speed (min
-1
)
0 - 4,000 0 - 6,000
Overall length 269 mm 284 mm 269 mm 279 mm 293 mm 269 mm 279 mm 279 mm 293 mm
Net weight 1.3 kg 1.4 kg
Safety class /II
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
END201-7
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
･ Read instruction manual.
･ DOUBLE INSULATION
･ Only for EU countries
Do not dispose of electric equipment
together with household waste material!
In observance of the European Directive,
on Waste Electric and Electronic
Equipment and its implementation in
accordance with national law, electric
equipment that have reached the end of
their life must be collected separately
and returned to an environmentally
compatible recycling facility.
ENE033-1
Intended use
The tool is intended for screw driving in wood, metal and
plastic.
ENF002-2
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and can
only be operated on single-phase AC supply. They are
double-insulated and can, therefore, also be used from
sockets without earth wire.
ENG905-1
Noise
The typical A-weighted noise level determined according
to EN60745:
Model
FS4000,FS4000X,FS4200,FS4300,FS4300X,
FS6300,FS6300R.FS6300X
Sound pressure level (L
pA
) : 82 dB (A)
Sound power level (L
WA
) : 93 dB (A)
Uncertainty (K) : 3 dB (A)
Wear ear protection
ENG900-1
Vibration
The vibration total value (tri-axial vector sum) determined
according to EN60745:
Model
FS4000,FS4000X,FS4200,FS4300,FS4300X,
FS6300,FS6300R.FS6300X
Work mode: screwdriving without impact
Vibration emission (a
h
) : 2.5 m/s
2
or less
Uncertainty (K) : 1.5 m/s
2
ENG901-1
•
The declared vibration emission value has been
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
• The declared vibration emission value may also be
used in a preliminary assessment of exposure.
WARNING:
•
The vibration emission during actual use of the power
tool can differ from the declared emission value
depending on the ways in which the tool is used.
• Be sure to identify safety measures to protect the
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as