User Manual

4
ENGLISH (Original instructions)
Explanation of general view
1-1. Shaft lock
2-1. Slide switch
3-1. Indication lamp
(speed adjusting dial)
4-1. Speed adjusting dial
6-1. Wheel guard
6-2. Bearing box
6-3. Screw
7-1. Wheel guard
7-2. Bearing box
7-3. Screw
7-4. Lever
8-1. Screw
8-2. Lever
9-1. Lock nut
9-2. Depressed center wheel
9-3. Inner flange
10-1. Lock nut wrench
10-2. Shaft lock
11-1. Ezynut
11-2. Abrasive wheel
11-3. Inner flange
11-4. Spindle
12-1. Shaft lock
13-1. Arrow
13-2. Notch
15-1. Lock nut
15-2. Flex wheel
15-3. Plastic pad
15-4. Inner flange
16-1. Sanding lock nut
16-2. Abrasive disc
16-3. Rubber pad
17-1. Marking A
17-2. Marking B
17-3. Marking C
17-4. Marking D
19-1. Lock nut
19-2. Abrasive cut-off wheel/diamond
wheel
19-3. Inner flange
19-4. Wheel guard for abrasive cut-off
wheel/diamond wheel
20-1. Wire cup brush
21-1. Wire wheel brush
22-1. Exhaust vent
22-2. Inhalation vent
SPECIFICATIONS
Model GA4040C GA4540C GA5040C GA6040C
Wheel diameter 100 mm (4") 115 mm (4-1/2") 125 mm (5") 150 mm (6")
Max. wheel thickness 6.4 mm
Spindle thread M10 M14 or 5/8" (country specific)
Rated speed (n) / No load speed (n
0
) 11,000 min
-1
11,000 min
-1
11,000 min
-1
9,000 min
-1
Overall length 303 mm 303 mm 303 mm 303 mm
Net weight 2.3 kg 2.5 kg 2.5 kg 2.6 kg
Safety class /II
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
ENE048-1
Intended use
The tool is intended for grinding, sanding and cutting of
metal and stone materials without the use of water.
ENF002-2
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They
are double-insulated and can, therefore, also be used
from sockets without earth wire.
ENG905-1
Noise
The typical A-weighted noise level determined
according to EN60745:
Model GA4040C, GA4540C, GA5040C
Sound pressure level (L
pA
) : 86 dB(A)
Sound power level (L
WA
) : 97 dB(A)
Uncertainty (K) : 3 dB(A)
Model GA6040C
Sound pressure level (L
pA
) : 87 dB(A)
Sound power level (L
WA
) : 98 dB(A)
Uncertainty (K) : 3 dB(A)
Wear ear protection
ENG900-1
Vibration
The vibration total value (tri-axial vector sum)
determined according to EN60745:
Model GA4040C
Work mode : surface grinding with normal side
grip
Vibration emission (a
h,AG
) : 5.0 m/s
2
Uncertainty (K) : 1.5 m/s
2
Work mode : surface grinding with anti vibration
side grip
Vibration emission (a
h,AG
) : 5.0 m/s
2
Uncertainty (K) : 1.5 m/s
2