User Manual

5
Wear ear protection
ENG208-4
Vibration
The vibration total value (tri-axial vector sum) determined
according to EN60745:
Work mode : surface grinding
Vibration emission (a
h,AG
) : 6.5 m/s
2
Uncertainty (K) : 1.5 m/s
2
If the tool is used for other applications, the vibration
values may be different.
ENG313-2
Work mode: disc sanding
Vibration emission (a
h,DS
) : 3.5m/s
2
Uncertainty (K) : 1.5 m/s
2
For Model GA7040R
ENG102-3
Noise
The typical A-weighted noise level determined according
to EN60745:
Sound pressure level (L
pA
) : 90 dB(A)
Sound power level (L
WA
) : 101 dB(A)
Uncertainty (K) : 3 dB(A)
Wear ear protection
ENG208-4
Vibration
The vibration total value (tri-axial vector sum) determined
according to EN60745:
Work mode : surface grinding
Vibration emission (a
h,AG
) : 7.0 m/s
2
Uncertainty (K) : 1.5 m/s
2
If the tool is used for other applications, the vibration
values may be different.
ENG313-2
Work mode: disc sanding
Vibration emission (a
h,DS
) : 3.0m/s
2
Uncertainty (K) : 1.5 m/s
2
For Model GA9020R, GA9040R
ENG102-3
Noise
The typical A-weighted noise level determined according
to EN60745:
Sound pressure level (L
pA
) : 90 dB(A)
Sound power level (L
WA
) : 101 dB(A)
Uncertainty (K) : 3 dB(A)
Wear ear protection
ENG208-4
Vibration
The vibration total value (tri-axial vector sum) determined
according to EN60745:
Work mode : surface grinding
Vibration emission (a
h,AG
) : 6.0 m/s
2
Uncertainty (K) : 1.5 m/s
2
If the tool is used for other applications, the vibration
values may be different.
ENG313-2
Work mode: disc sanding
Vibration emission (a
h,DS
) : 2.5m/s
2
Uncertainty (K) : 1.5 m/s
2
For Model GA9030R
ENG102-3
Noise
The typical A-weighted noise level determined according
to EN60745:
Sound pressure level (L
pA
) : 90 dB(A)
Sound power level (L
WA
) : 101 dB(A)
Uncertainty (K) : 3 dB(A)
Wear ear protection
ENG208-4
Vibration
The vibration total value (tri-axial vector sum) determined
according to EN60745:
Work mode : surface grinding
Vibration emission (a
h,AG
) : 5.5 m/s
2
Uncertainty (K) : 1.5 m/s
2
If the tool is used for other applications, the vibration
values may be different.
ENG313-2
Work mode: disc sanding
Vibration emission (a
h,DS
) : 2.5m/s
2
Uncertainty (K) : 1.5 m/s
2
ENG901-1
The declared vibration emission value has been
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
The declared vibration emission value may also be
used in a preliminary assessment of exposure.
WARNING:
The vibration emission during actual use of the
power tool can differ from the declared emission
value depending on the ways in which the tool is
used.
Be sure to identify safety measures to protect the
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
ENH101-13
For European countries only
EC Declaration of Conformity
We Makita Corporation as the responsible
manufacturer declare that the following Makita
machine(s):
Designation of Machine:
A
ngle Grinde
r
Model No./ Type: GA7020R, GA7030R, GA7040R,
GA9020R, GA9030R, GA9040R
are of series production and