Use and Care Manual

2
ENGLISH
ENGLISH (Original instructions)
SPECIFICATIONS
Model: GCU01 GCU02 GCU03
Overall length
(without guide bar and battery)
266 mm
(10-1/2″)
Rated voltage D.C. 36 V - 40 V max
Net weight *1 2.6 kg (5.7 lbs)
*2 3.9 - 4.6 kg
(8.6 - 10.1 lbs)
4.0 - 4.7 kg (8.8 - 10.4 lbs)
Standard guide bar length 300 mm
(12″)
350 mm
(14″)
400 mm
(16″)
Recommended guide
bar length
with 90PX 300 - 400 mm
(12″ - 16")
with 91PX 300 - 350 mm
(12″ - 14")
-
Applicable saw chain type
(refer to the table below)
90PX
91PX
90PX
Standard sprocket Number of teeth 6
Pitch 3/8″
Chain speed 0 - 24.8 m/s
(0 - 1,490 m/min)
(0 - 4,880 ft/min)
Chain oil tank volume 200 cm
3
(6.8  oz)
• Due to our continuing program of research and development, the specications herein are sub-
ject to change without notice.
• Specications may di󰀨er from country to country.
• The weight may di󰀨er depending on the attachment(s), including the battery cartridge. The light-
est and heaviest combination, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge BL4020 / BL4025* / BL4040* / BL4050F
* : Recommended battery
Charger DC40RA / DC40RB / DC40RC
• Some of the battery cartridges and chargers listed above may not be available depending on your
region of residence.
WARNING: Only use the battery cartridges and chargers listed above. Use of any other
battery cartridges and chargers may cause injury and/or re.
NOTE: We recommend using the recommended batteries to fully obtain the performance of this tool.