Use and Care Manual
14 ENGLISH
4.
Insertthespongelterbetweenthepillarsandsetit
in the original position. Make sure that each bottom edge
ofthepillarholdsdownthespongelter,andthereisno
gapbetweenthespongelterandsuctionopening.
2
1
►1.Spongelter2. Bottom edge of pillar
Wall mount for cordless cleaner
Optional accessory
NOTE: The screw to mount the holder is not included.
Prepareascrewwhichtswiththematerialtoscrew
into.
Attach the wall mount for cordless cleaner to a hard wooden wall,
beam or column, where the wall mount for cordless cleaner can
bermlysecured.Alwaysbesurethatthewallmountforcordless
cleaner is securely attached before hanging the cleaner.
1
►1. Wall mount for cordless cleaner
CAUTION: Do not hang the cleaner to the wall
mount violently or hang other appliances than the
cleaner.
Troubleshooting
Before asking for repairs, check the following points.
Symptom Area to be investigated Fixing method
Weak suction power Isthecapsulefullofdust? Empty the capsule of dust.
Isthelterclogged? Cleanorwashthelter.
Isthebatterycartridgedischarged? Charge the battery cartridge.
Not working Isthebatterycartridgedischarged? Charge the battery cartridge.
CAUTION: Do not attempt to repair the cleaner by yourself.
OPTIONAL ACCESSORIES
CAUTION:
These accessories or attachments
are recommended for use with your Makita tool spec-
ied in this manual. The use of any other accessories
orattachmentsmightpresentariskofinjurytopersons.
Only use accessory or attachment for its stated purpose.
Ifyouneedanyassistanceformoredetailsregarding
these accessories, ask your local Makita Service Center.
• Extension wand (Straight pipe)
• Nozzle
• Nozzleforcarpet
• Shelf brush
• Cornernozzle
• Round brush
• Flexible hose
• Filter
• Prelter
• Highperformancelter
• HEPAlter
• Freenozzle
• Seatnozzle
• Crevicenozzle
• Wall mount for cordless cleaner
• Cyclone attachment
• Tool bag
• Makita genuine battery and charger
NOTE: Some items in the list may be included in the
tool package as standard accessories. They may
dierfromcountrytocountry.