Use and Care Manual

11 ENGLISH

When using attachment with lock function

To install attachment, insert it to the suction inlet of the cleaner

until it clicks. Make sure that the attachment is locked.

Fig.22

►

1. Suction inlet 2. Attachment with lock function 3. Hook

NOTICE: When installing the attachment with

lock function, be sure to align the release button

on the cleaner with the hook on the attachment. If

they are not aligned, the attachment will not be locked

and may come o󰀨 from the cleaner.

To remove, pull the attachment while pushing the

release button.

Fig.23

► 1. Release button 2. Attachment with lock function

When using attachment without lock function

NOTICE: To connect attachment without lock

function, twist and insert it securely into the suc-

tion inlet of the cleaner. To disconnect the attach-

ment, pull it away while twisting.

Fig.24

Cleaning (Suction)

Nozzle

Attach the nozzle to clean o󰀨 tables, desks, furniture,

etc. The nozzle slips on easily.

Fig.25

► 1. Nozzle

Nozzle + Extension wand (Straight pipe)

The extension wand ts in between the nozzle and the

cleaner itself. This arrangement is convenient for clean-

ing a oor in a standing position.

Fig.26

► 1. Cleaner body 2. Extension wand 3. Nozzle

Corner nozzle

Fit on the corner nozzle for cleaning corners and crev-

ices of a car or furniture.

Fig.27

► 1. Corner nozzle 2. Cleaner body