Use and Care Manual

9 ENGLISH
Nose adapter
CAUTION: Always make sure that your
ngers are not placed on the switch trigger or
the contact element and the battery cartridge is
removed before installing the nose adapter.
When ring pin nails on the material with easily-marred
surfaces, use the nose adapter.
Place the nose adapter over the contact top of the driver
guide so the guide projections inside the nose adapter
well t into the guide notches in the driver guide.
You can store the nose adapter in the holder at the back
end of the magazine to keep it from being lost.
1
2
4
3
5
Fig.11
► 1. Nose adapter 2. Driver guide 3. Guide projections
4. Guide notches 5. Holder
Nose adapter for driving on at
surfaces
Optional accessory
Use the optional nose adapter designed for fastening
operation on at and even surfaces. It protects the soft
surfaces of workpiece against marks and scratches to
be made by round pointed contact tops.
Fig.12
Place the optional nose adapter over the contact top
of the driver guide so the guide projections inside the
nose adapter well t into the guide notches in the driver
guide.
1
2
4
3
Fig.13
► 1. Optional nose adapter 2. Driver guide 3. Guide
projections 4. Guide notches
Hook
CAUTION: When installing the hook, always
secure it with the screw rmly. If not, the hook
may come o󰀨 from the tool and result in the personal
injury.
CAUTION: Use the hanging/mounting parts
for their intended purposes only. Using for unin-
tended purpose may cause accident or personal
injury.
CAUTION: Do not hang the hook from the
waist belt. Dropping the pin nailer, which is caused
by the hook accidentally coming out of place, may
cause unintentional ring and result in personal
injuries.
Fig.14