Operation Manual

English - 8 -
When observing the safety rules and using the original accessories, this hot air tool is intended for all appli-
cations with hot air that are listed in these operating instruction
A falling down nozzle can set an object on fire. Nozzles must be mounted firmly and secure on the
unit.
Touching a hot nozzle can lead to serious burns. Before attaching or replacing a nozzle, allow the
unit to cool down completely or use a suitable tool.
A hot nozzle can set a surface on fire. Place down hot nozzles only on fire-proof surfaces.
An incorrect or defective nozzle can lead to heat accumulation and damage the unit. Use only origi-
nal nozzles according to the table that are suitable for your unit.
Technical Data
A B C
Voltage [V] 230 120 100 230 120 100 230 120 100
Frequency [Hz] 50/60 50/60 50/60
Power [W] 1600 1200 1100 1800 1400 1200 2000 1500 1300
Current con-
sumption
[A]
7 10 11 8 12 12 9 13 13
Switch positions 0 - l - ll 0 - l - ll 0 - l
Position I II I II I II Manually adjustable Electronically adjustable and controlled
Temperature [°C] 350 500 500 500 100–550 80–550 80–550 80–650 80–650 80–650
[°F] 660 930 930 930 210–1020 180–1020 180–1020 180–1200 180–1200 180–1200
Position I II I II I II I II I II I II Electronically adjustable
Air flow [l/min] 350 500 250 400 250 400 250 550 250 450 250 450 200–550 200–500 200–500
[cfm] 12.5 17.5 8.8 14 8.8 14 8.8 19.5 8.8 16 8.8 16 7–19.5 7–17.5 7–17.5
Weight
with cord
[kg] 0.68 0.74 0.74 0.72 0.78 0.78 0.78 0.84 0.84
[lbs] 1.5 1.63 1.63 1.6 1.72 1.72 1.72 1.85 1.85
Dimensions
L x B x H
[mm] 230 x 80 x 240
[inch] 9.1 x 3.2 x 9.5
Protection class II/ (Double insulated)
Intended Use
Applications A B C
Shrinking of shrinkdown tubing, solder connectors and solder terminals, packaging and electrical
components.
l l l
Deforming of articles made from acrylic, PVC, and polystyrene, tubing, plates and profiles, as well as
moist woods.
l l l
Welding of thermoplastic polymer, flooring materials of PVC and linoleum, PVC-coated fabric, tar-
paulins and foils.
l l
Soldering of tin, special silver solder, SMD elements, cable lugs, and for loosening soldered connec-
tions.
l l
Paint removal - Removal of old and even thick coatings of oil paint, varnish and synthetic plaster. l l l
Drying of colour shade samples, filler, adhesives, construction joints and stucco forms. l l l
Joining adhesives – Large-surface gluing with contact adhesives, activation of pressure-sensitive
adhesives, acceleration of bonding processes, releasing of bonding points as well as releasing or
bonding of edge band or venee.
l l l
Defrosting of icy stairs and steps, door locks, trunk lids, car doors or water pipes, as well as for
defrosting refrigerators and ice boxes.
l l l
Disinfection – With hot air of 600 °C, you can quickly rid animal sties/stables of bacteria. Wood-
worm infestation can be controlled (Caution: Danger of fire! Do not heat up the wooden surface exces-
sively).
l l
Attaching the Nozzle onto the Heating-element Tube 3
A
l l l
B
l l l l
C
l l l l l l l l
0.58
1.28
0.60
1.32
0.63
1.39
Weight
without cord