Operation Manual

4
ENGLISH
Explanation of general view
SPECIFICATIONS
• Due to our continuing program of research and development, the specifications herein are subject to change without
notice.
• Note: Specifications may differ from country to country.
Symbols
The following show the symbols used for the tool. Be sure
that you understand their meaning before use.
............ Read instruction manual.
............. DOUBLE INSULATION
Intended use
The tool is intended for chiselling work in concrete, brick,
stone and asphalt as well as for driving and compacting
with appropriate accessories.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and can
only be operated on single-phase AC supply. They are
double-insulated in accordance with European Standard
and can, therefore, also be used from sockets without
earth wire.
1. Switch trigger
2. Lock button
3. Side grip
4. Tool retainer
5. Push button
6. Hole
7. Commutator
8. Insulating tip
9. Carbon brush
10. Screwdriver
11. Rear cover
12. Brush holder cap
13. Hex wrench
14. Hex bolts
15. Grease
Model HM0830
Blows per minute 2,700 min
-1
Overall length 390 mm
Net weight 4.5 kg
Safety class /II