Operation Manual

Lubrication (Fig. 9 & 10)

This tool requires no hourly or daily lubrication because it

has a greasepacked lubrication system. It should be relu-

bricated after every 6 months of operation. Send the com-

plete tool to Makita Authorized or Factory Service Center

for this lubrication service. However, if circumstances

require that you should lubricate it by yourself, proceed as

follows.

First, switch off and unplug the tool.

Remove the cap using a wrench 23, then replenish with

fresh grease (60 g). Use only Makita genuine hammer

grease (optional accessory). Filling with more than the

specified amount of grease (approx. 60 g) can cause

faulty hammering action or tool failure. Fill only with the

specified amount of grease.

Reinstall the cap and secure with the wrench.

To maintain product SAFETY and RELIABILITY, repairs,

any other maintenance or adjustment should be per-

formed by Makita Authorized Service Centers, always

using Makita replacement parts.

ACCESSORIES

CAUTION:

• These accessories or attachments are recommended

for use with your Makita tool specified in this manual.

The use of any other accessories or attachments might

present a risk of injury to persons. Only use accessory

or attachment for its stated purpose.

If you need any assistance for more details regarding

these accessories, ask your local Makita service center.

• Bull point

• Cold chisel

• Scaling chisel

• Clay spade

• Rammer

• Safety goggles

• Hammer grease

•Hex wrench

• Wrench 23