Demolition Hammer HM0810T DOUBLE INSULATION
SPECIFICATIONS Model HM0810T Blows per minute ........................................................................................................................................ 2,900 Overall length .......................................................................................................................................... 428 mm Net weight ...................................................................................................................................................5.
1 1 2 2 1 2 3 5 6 4 3 4 9 7 10 8 5 6 12 13 11 7 8 3
Symbols The following show the symbols used for the tool. Be sure that you understand their meaning before use. ❏ Read instruction manual.
ENGLISH Explanation of general view 1 2 3 4 5 Bit Change ring Side grip Grip base Lock button 6 7 8 9 10 Switch trigger Hex wrench Rear cover Screwdriver Brush holder cap GENERAL SAFETY RULES 11 Lock nut wrench 12 Crank cap 13 Hammer grease 11. Avoid accidental starting. Ensure the switch is in the off-position before plugging in. Carrying power tools with your finger on the switch or plugging in power tools that have the switch on invites accidents. 12.
OPERATING INSTRUCTIONS Service 23. Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained. 24. Follow instruction for lubricating and changing accessories. 25. Keep handles dry, clean and free from oil and grease. Installing or removing bit (Fig. 1 & 2) Important: Always be sure that the tool is switched off and unplugged before installing or removing the bit.
ACCESSORIES CAUTION: These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. The accessories or attachments should be used only in the proper and intended manner.
Makita Corporation Anjo, Aichi, Japan 884096C223
