ENGLISH INSTRUCTION MANUAL Demolition Hammer HM1306 008264 WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
ENGLISH SPECIFICATIONS Model HM1306 Blows per minute 1450 min-1 Overall length 652 mm Net weight 15 kg • Due to our continuing programme of research and development, the specifications herein are subject to change without notice. • Note: Specifications may differ from country to country. END103-2 For safe operations: Symbols 1. The following show the symbols used for the equipment. Be sure that you understand their meaning before use. ・ Read instruction manual. 2.
12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. Secure work. Use clamps or a vice to hold the work. It is safer than using your hand and it frees both hands to operate the tool. Do not overreach. Keep proper footing and balance at all times. Maintain tools with care. Keep cutting tools sharp and clean for better and safer performance. Follow instructions for lubrication and changing accessories. Inspect tool cord periodically and if damaged have it repaired by an authorized service facility.
15. 16. Installing or removing the bit EXTENSION CORDS. Use only three-wire extension cords which have three-prong grounding-type plugs and three-pole receptacles which accept the tool’s plug. Replace or repair damaged or worn cord immediately. Do not operate the tool at no-load unnecessarily. 2 3 4 SAVE THESE INSTRUCTIONS. 008266 FUNCTIONAL DESCRIPTION • 1. Bull point 2. Notched portion 3. Tool retainer 4.
MAINTENANCE • Oiling 1 CAUTION: Always be sure that the tool is switched off and unplugged before attempting to perform inspection or maintenance. 1. Wrench 2. Oil gauge 2 Replacing carbon brushes 1. Commutator 2. Insulating tip 3. Carbon brush 2 008271 1 1. Oil supply 1 3 001146 When the resin insulating tip inside the carbon brush is exposed to contact the commutator, it will automatically shut off the motor. When this occurs, both carbon brushes should be replaced.
Makita Corporation 884757-9 8