Operation Manual

5ENGLISH
źІżLISHă(ЇrТРТЧКХăТЧstruМtТШЧs)
SPECIFICATIONS
Model: HP331D
Drilling capacities Concrete 8 mm
Steel 10 mm
Wood 21 mm
Fastening capacities Wood screw 5.1 mm x 63 mm
Machine screw M6
No load speed High (2) 0 - 1,700 min
-1
Low (1) 0 - 450 min
-1
Blows per minute High (2) 0 - 25,500 min
-1
Low (1) 0 - 6,750 min
-1
Overall length 201 mm
Rated voltage D.C. 10.8 V
Battery cartridge BL1015, BL1020B BL1040B
Net weight 1.1 kg 1.3 kg
•ă DuОătШăШurăМШЧtТЧuТЧРăЩrШРrКЦăШПărОsОКrМСăКЧНăНОЯОlШЩЦОЧt,ătСОăsЩОМТiМКtТШЧsăСОrОТЧăКrОăsuЛУОМtătШăМСКЧРОă
without notice.
•ă SЩОМТiМКtТШЧsăКЧНăЛКttОrвăМКrtrТНРОăЦКвăНТППОrăПrШЦăМШuЧtrвătШăМШuЧtrв.
•ă АОТРСt,ăаТtСăЛКttОrвăМКrtrТНРО,ăКММШrНТЧРătШăEPTA-PrШМОНurОăŃń/2ŃŃ3
Intended use
TСОătШШlăТsăТЧtОЧНОНăПШrăТЦЩКМtăНrТllТЧРăТЧăЛrТМФ,ăМШЧМrОtОă
КЧНăstШЧО.ăItăТsăКlsШăsuТtКЛlОăПШrăsМrОаăНrТЯТЧРăКЧНăНrТll-
ing without impact in wood, metal, ceramic and plastic.
Noise
TСОătвЩТМКlăA-аОТРСtОНăЧШТsОălОЯОlăНОtОrЦТЧОНăКММШrН-
ing to EN60745:
Sound pressure level (L
ЩA
)ăŚăŘńăНB(A)
Sound power level (L
АA
)ăŚăř2ăНBă(A)
UЧМОrtКТЧtвă(K)ăŚă3ăНB(A)
WARNING: Wear ear protection.
Vibration
TСОăЯТЛrКtТШЧătШtКlăЯКluОă(trТ-КбТКlăЯОМtШrăsuЦ)ăНОtОr-
mined according to EN60745:
Work mode: impact drilling into concrete
VТЛrКtТШЧăОЦТssТШЧă(К
h,ID
)ăŚăŘ.ŃăЦ/s
2
UЧМОrtКТЧtвă(K)ăŚăń.5ăЦ/s
2
Work mode: drilling into metal
VТЛrКtТШЧăОЦТssТШЧă(К
h,D
)ăŚă2.5ăЦ/s
2
UЧМОrtКТЧtвă(K)ăŚăń.5ăЦ/s
2
NOTE:ăTСОăНОМlКrОНăЯТЛrКtТШЧăОЦТssТШЧăЯКluОăСКsă
ЛООЧăЦОКsurОНăТЧăКММШrНКЧМОăаТtСătСОăstКЧНКrНătОstă
ЦОtСШНăКЧНăЦКвăЛОăusОНăПШrăМШЦЩКrТЧРăШЧОătШШlăаТtСă
another.
NOTE:ăTСОăНОМlКrОНăЯТЛrКtТШЧăОЦТssТШЧăЯКluОă
ЦКвăКlsШăЛОăusОНăТЧăКăЩrОlТЦТЧКrвăКssОssЦОЧtăШПă
exposure.
WARNING:ăTСОăЯТЛrКtТШЧăОЦТssТШЧăНurТЧРăКМtuКlă
use of the power tool can differ from the declared
emission value depending on the ways in which the
tool is used.
WARNING: Be sure to identify safety measures
tШăЩrШtОМtătСОăШЩОrКtШrătСКtăКrОăЛКsОНăШЧăКЧăОstТЦК-
tion of exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it is
running idle in addition to the trigger time).
EC Declaration of Conformity
For European countries only
Makita declares that the following Machine(s):
Designation of Machine: Cordless Hammer Driver Drill
MШНОlăІШ./ăTвЩОŚăHP33ńD
Conforms to the following European Directives:
2ŃŃ6/42/EC
TСОвăКrОăЦКЧuПКМturОНăТЧăКММШrНКЧМОăаТtСătСОăПШllШаТЧРă
standard or standardized documents: EN60745
TСОătОМСЧТМКlăilОăТЧăКММШrНКЧМОăаТtСă2ŃŃ6/42/ECăТsă
КЯКТlКЛlОăПrШЦŚ
Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium
25.2.2015
Yasushi Fukaya
Director
Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium