Operation Manual

10
• Grooving chisel
• Drill chuck assembly
• Drill chuck S13
• Chuck adapter
• Chuck key S13
• Bit grease
• Side grip
• Depth gauge
• Blow-out bulb
•Dust cup
• Safety goggles
• Plastic carrying case
For Model HR3200C
For European countries only
Noise
ENG102-1
The typical A-weighted noise level determined according
to EN60745-2-6:
Sound pressure level (L
pA
): 89 dB (A)
Sound power level (L
WA
): 100 dB (A)
Uncertainty (K): 3 dB (A)
Wear ear protection
Vibration
The vibration total value (tri-axial vector sum) determined
according to EN60745-2-6:
ENG215-1
Work mode: chiselling function
Vibration emission (a
h,CHeq
): 12.5 m/s
2
Uncertainty (K): 1.5 m/s
2
ENG303-1
Work mode: hammer drilling into concrete, 16 mm
diameter and 100 mm depth
Vibration emission (a
h,HD
): 18 m/s
2
Uncertainty (K): 1.5 m/s
2
ENG302-1
Work mode: drilling into metal
Vibration emission (a
h,D
): 2.5 m/s
2
or less
For Model HR3210C
For European countries only
Noise
ENG102-1
The typical A-weighted noise level determined according
to EN60745-2-6:
Sound pressure level (L
pA
): 89 dB (A)
Sound power level (L
WA
): 100 dB (A)
Uncertainty (K): 3 dB (A)
Wear ear protection
Vibration
The vibration total value (tri-axial vector sum) determined
according to EN60745-2-6:
ENG215-1
Work mode: chiselling function
Vibration emission (a
h,CHeq
): 7.5 m/s
2
Uncertainty (K): 1.5 m/s
2
ENG303-1
Work mode: hammer drilling into concrete, 16 mm
diameter and 100 mm depth
Vibration emission (a
h,HD
): 10 m/s
2
Uncertainty (K): 1.5 m/s
2
ENG302-1
Work mode: drilling into metal
Vibration emission (a
h,D
): 2.5 m/s
2
or less
For Model HR3210FCT
For European countries only
Noise
ENG102-1
The typical A-weighted noise level determined according
to EN60745-2-6:
Sound pressure level (L
pA
): 88 dB (A)
Sound power level (L
WA
): 99 dB (A)
Uncertainty (K): 3 dB (A)
Wear ear protection
Vibration
The vibration total value (tri-axial vector sum) determined
according to EN60745-2-6:
ENG215-1
Work mode: chiselling function
Vibration emission (a
h,CHeq
): 8 m/s
2
Uncertainty (K): 1.5 m/s
2
ENG303-1
Work mode: hammer drilling into concrete, 16 mm
diameter and 100 mm depth
Vibration emission (a
h,HD
): 10 m/s
2
Uncertainty (K): 1.5 m/s
2
ENG302-1
Work mode: drilling into metal
Vibration emission (a
h,D
): 2.5 m/s
2
or less
EC-DECLARATION OF CONFORMITY
Model; HR3200C, HR3210C, HR3210FCT
ENH101-8
We declare under our sole responsibility that this product
is in compliance with the following standards of
standardized documents;
EN60745, EN55014, EN61000 in accordance with
Council Directives, 2004/108/EC, 98/37/EC.
CE 2007
Tomoyasu Kato
Director
Responsible Manufacturer:
Makita Corporation
3-11-8, Sumiyoshi-cho, Anjo, Aichi, JAPAN
Authorized Representative in Europe:
Makita International Europe Ltd.
Michigan Drive, Tongwell, Milton Keynes, Bucks MK15
8JD, ENGLAND