Instructions

12 ENGLISH
Model HR003G with DX12
Sound pressure level (L
pA
) : 93 dB(A)
Sound power level (L
WA
) : 104 dB (A)
Uncertainty (K) : 3 dB(A)
Model HR004G with DX14
Sound pressure level (L
pA
) : 93 dB(A)
Sound power level (L
WA
) : 104 dB (A)
Uncertainty (K) : 3 dB(A)
NOTE:
The declared noise emission value(s) has been
measured in accordance with a standard test method
and may be used for comparing one tool with another.
NOTE: The declared noise emission value(s) may
also be used in a preliminary assessment of exposure.
WARNING: Wear ear protection.
WARNING: The noise emission during actual
use of the power tool can differ from the declared
value(s) depending on the ways in which the tool is
used especially what kind of workpiece is processed.
WARNING: Be sure to identify safety measures
to protect the operator that are based on an estima-
tion of exposure in the actual conditions of use (tak-
ing account of all parts of the operating cycle such
as the times when the tool is switched off and when
it is running idle in addition to the trigger time).
Vibration
The following table shows the vibration total value (tri-axial
vector sum) determined according to applicable standard.
Model HR001G
Work mode Vibration
emission
Uncertainty (K) Applicable
standard
Hammer
drilling into
concrete
(a
h, HD
)
7.0 m/s
2
1.5 m/s
2
EN60745-2-6
Hammer
drilling into
concrete with
DX12 (a
h, HD
)
7.0 m/s
2
1.5 m/s
2
EN60745-2-6
Chiselling func-
tion with side
grip (a
h, Cheq
)
6.5 m/s
2
1.5 m/s
2
EN60745-2-6
Drilling into
metal (a
h, D
)
2.5 m/s
2
or
less
1.5 m/s
2
EN60745-2-1
Model HR002G
Work mode Vibration
emission
Uncertainty (K) Applicable
standard
Hammer
drilling into
concrete
(a
h, HD
)
6.5 m/s
2
1.5 m/s
2
EN60745-2-6
Hammer
drilling into
concrete with
DX14 (a
h, HD
)
6.0 m/s
2
1.5 m/s
2
EN60745-2-6
Chiselling func-
tion with side
grip (a
h, Cheq
)
7.5 m/s
2
1.5 m/s
2
EN60745-2-6
Drilling into
metal (a
h, D
)
2.5 m/s
2
1.5 m/s
2
EN60745-2-1
Model HR003G
Work mode Vibration
emission
Uncertainty (K) Applicable
standard
Hammer
drilling into
concrete
(a
h, HD
)
7.0 m/s
2
1.5 m/s
2
EN60745-2-6
Hammer
drilling into
concrete with
DX12 (a
h, HD
)
7.0 m/s
2
1.5 m/s
2
EN60745-2-6
Chiselling func-
tion with side
grip (a
h, Cheq
)
7.0 m/s
2
1.5 m/s
2
EN60745-2-6
Drilling into
metal (a
h, D
)
2.5 m/s
2
or
less
1.5 m/s
2
EN60745-2-1
Model HR004G
Work mode Vibration
emission
Uncertainty (K) Applicable
standard
Hammer
drilling into
concrete
(a
h, HD
)
6.5 m/s
2
1.5 m/s
2
EN60745-2-6
Hammer
drilling into
concrete with
DX14 (a
h, HD
)
6.0 m/s
2
1.5 m/s
2
EN60745-2-6
Chiselling func-
tion with side
grip (a
h, Cheq
)
7.5 m/s
2
1.5 m/s
2
EN60745-2-6
Drilling into
metal (a
h, D
)
2.5 m/s
2
1.5 m/s
2
EN60745-2-1
NOTE: The declared vibration total value(s) has been
measured in accordance with a standard test method
and may be used for comparing one tool with another.
NOTE: The declared vibration total value(s) may also
be used in a preliminary assessment of exposure.
WARNING: The vibration emission during
actual use of the power tool can differ from the
declared value(s) depending on the ways in which
the tool is used especially what kind of workpiece
is processed.
WARNING: Be sure to identify safety mea-
sures to protect the operator that are based on an
estimation of exposure in the actual conditions of
use (taking account of all parts of the operating
cycle such as the times when the tool is switched
off and when it is running idle in addition to the
trigger time).
EC Declaration of Conformity
For European countries only
The EC declaration of conformity is included as Annex A
to this instruction manual.