Operation Manual

4 ENGLISH
ENGLISH (Original instructions)
SPECIFICATIONS
Model: JR103D JR105D
Length of stroke 13 mm
Strokes per minute 0 - 3,300 min
-1
Max. cutting
capacities
Pipe 50 mm
Wood 50 mm
Rated voltage D.C. 10.8 V
Battery cartridge BL1015, BL1020B BL1040B BL1015, BL1020B BL1040B
Overall length 376 mm 386 mm 376 mm 386 mm
Net weight 1.3 kg 1.5 kg 1.3 kg 1.5 kg
• Duetoourcontinuingprogramofresearchanddevelopment,thespecicationshereinaresubjecttochange
without notice.
• Specicationsandbatterycartridgemaydifferfromcountrytocountry.
• Weight,withbatterycartridge,accordingtoEPTA-Procedure01/2003
Intended use
Thetoolisintendedforsawingwood,plasticandfer-
rous materials.
Noise
ThetypicalA-weightednoiseleveldeterminedaccord-
ing to EN60745:
Model JR103D
Sound pressure level (L
pA
):78dB(A)
Uncertainty(K):3dB(A)
Thenoiselevelunderworkingmayexceed80dB(A).
Model JR105D
Sound pressure level (L
pA
):78dB(A)
Uncertainty(K):3dB(A)
Thenoiselevelunderworkingmayexceed80dB(A).
WARNING: Wear ear protection.
Vibration
Thevibrationtotalvalue(tri-axialvectorsum)deter-
mined according to EN60745:
Model JR103D
Workmode:cuttingboards
Vibrationemission(a
h,B
):8.0m/s
2
Uncertainty(K):1.5m/s
2
Workmode:cuttingwoodenbeams
Vibrationemission(a
h,WB
)8.0m/s
2
Uncertainty(K):1.5m/s
2
Model JR105D
Workmode:cuttingboards
Vibrationemission(a
h,B
):8.0m/s
2
Uncertainty(K):1.5m/s
2
Workmode:cuttingwoodenbeams
Vibrationemission(a
h,WB
)8.0m/s
2
Uncertainty(K):1.5m/s
2
NOTE:Thedeclaredvibrationemissionvaluehas
beenmeasuredinaccordancewiththestandardtest
methodandmaybeusedforcomparingonetoolwith
another.
NOTE:Thedeclaredvibrationemissionvalue
mayalsobeusedinapreliminaryassessmentof
exposure.
WARNING:Thevibrationemissionduringactual
use of the power tool can differ from the declared
emission value depending on the ways in which the
tool is used.
WARNING: Be sure to identify safety measures to
protecttheoperatorthatarebasedonanestimation
of exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it is
running idle in addition to the trigger time).
EC Declaration of Conformity
For European countries only
Makita declares that the following Machine(s):
Designation of Machine: Cordless Recipro Saw
ModelNo./Type:JR103D,JR105D
Conforms to the following European Directives:
2006/42/EC
Theyaremanufacturedinaccordancewiththefollowing
standard or standardized documents: EN60745
Thetechnicalleinaccordancewith2006/42/ECis
availablefrom:
Makita,Jan-BaptistVinkstraat2,3070,Belgium
24.2.2015
Yasushi Fukaya
Director
Makita,Jan-BaptistVinkstraat2,3070,Belgium