ENGLISH (Original instructions) INSTRUCTION MANUAL Cordless Jig Saw JV100D 012311 IMPORTANT: Read Before Using.
ENGLISH (Original instructions) SPECIFICATIONS Model JV100D Length of stroke 18 mm Strokes per minute (min-1) 0 - 2400 Blade type B type Wood Max. cutting capacities 65 mm Mild steel 2 mm Aluminum 4 mm Overall length 231 mm Net weight 1.7 kg Rated voltage D.C. 10.8 V • Due to our continuing programme of research and development, the specifications herein are subject to change without notice. • Specifications and battery cartridge may differ from country to country.
ENH101-15 3. Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control. Electrical safety 4. Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock. 5. Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and refrigerators.
coins, keys, nails, screws or other small metal objects, that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire. 27. Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns. Service 28.
13. 14. 15. 7. Do not operate the tool at no-load unnecessarily. Some material contains chemicals which may be toxic. Take caution to prevent dust inhalation and skin contact. Follow material supplier safety data. Always use the correct dust mask/respirator for the material and application you are working with. 8. 9. SAVE THESE INSTRUCTIONS. Tips for maintaining maximum battery life 1. SAVE THESE INSTRUCTIONS.
Selecting the cutting action FUNCTIONAL DESCRIPTION • 1. Cutting action changing lever CAUTION: Always be sure that the tool is switched off and the battery cartridge is removed before adjusting or checking function on the tool. Installing or removing battery cartridge 1 1. Battery 2. Buttons 1 012312 This tool can be operated with an orbital or a straight line (up and down) cutting action.
CAUTION: Before installing the battery cartridge into the tool, always check to see that the switch trigger actuates properly and returns to the "OFF" position when released. • When not operating the tool, depress the lock-off button from A side to lock the switch trigger in the OFF position. To prevent the switch trigger from accidentally pulled, the lock-off button is provided. To start the tool, depress the lock-off button from B side and pull the switch trigger.
Loosen the bolt on the back of the base with the hex wrench. Move the base so that the bolt is positioned in the center of the cross-shaped slot in the base. OPERATION • • CAUTION: Always hold the base flush with the workpiece. Failure to do so may cause blade breakage, resulting in a serious injury. Advance the tool very slowly when cutting curves or scrolling. Forcing the tool may cause a slanted cutting surface and blade breakage. 1 1. Cutting line 2. Base 1. Edge 2.
B) Plunge cutting Clean cutting operations can be performed by connecting this tool to a Makita vacuum cleaner. Insert the hose of the vacuum cleaner into the hole at the rear of the tool. Lower the dust cover before operation. NOTE: • Dust extraction cannot be performed when making bevel cuts. Rip fence (optional accessory) 012325 You need not bore a starting hole or make a lead-in cut if you carefully do as follows.
2. Circular cuts When cutting circles or arcs of 170 mm or less in radius, install the rip fence as follows. • CAUTION: The anti-splintering device cannot be used when making bevel cuts. Cover plate (Optional accessory) 1. Fence guide 2. Rip fence 3. Threaded knob 4. Pin 1. Cover plate 2. Aluminum base 1 3 1 2 4 2 012330 Insert the rip fence into the rectangular hole on the side of the base with the fence guide facing up.
Makita Corporation Anjo, Aichi, Japan 885079-226 12 www.makita.
