Use and Care Manual

2 ENGLISH
ENGLISH (Original instructions)
SPECIFICATIONS
Model: LS1019 LS1019L
Blade diameter 255 mm (10″)
Hole diameter 15.88 mm (5/8″)
Max. kerf thickness of the saw blade 3.2 mm (1/8″)
Max. miter angle Right 60°, Left 60°
Max. bevel angle Right 48°, Left 48°
No load speed (RPM) 3,200 /min
Laser type - Wavelength 655 nm, Maximum
output
1mW (Laser
Class II)
Dimensions (L x W x H) 805 mm x 644 mm x 660 mm
(31-3/4" x 25-3/8" x 26")
Net weight 26.1 kg
(57.6 lbs)
26.3 kg
(57.9 lbs)
Cutting capacities (H x W)
Miter angle Bevel angle
45° (left) 0° 45° (right)
0° 47 mm x 305 mm
(1-7/8″ x 12″)
61 mm x 279 mm
(2-3/8″ x 11″)
71 mm x 305 mm
(2-13/16″ x 12″)
91 mm x 279 mm
(3-5/8″ x 11″)
29 mm x 305 mm
(1-1/8″ x 12″)
43 mm x 279 mm
(1-11/16″ x 11″)
45° (right and left) 47 mm x 215 mm
(1-7/8″ x 8-1/2″)
61 mm x 197 mm
(2-3/8″ x 7-3/4″)
71 mm x 215 mm
(2-13/16″ x 8-1/2″)
91 mm x 197 mm
(3-5/8″ x 7-3/4″)
29 mm x 215 mm
(1-1/8″ x 8-1/2″)
43 mm x 197 mm
(1-11/16″ x 7-3/4″)
60° (right and left) - 71 mm x 152 mm
(2-13/16″ x 6″)
91 mm x 139 mm
(3-5/8″ x 5-1/2″)
-
Cutting capacities for special cuttings
Type of cutting Cutting capacity
Crown molding 45° type
(with crown molding stopper used)
168 mm
(6-5/8″)
Base board
(with horizontal vise used)
133 mm
(5-1/4″)
• Due to our continuing program of research and development, the specications herein are subject to change
without notice.
• Specications may differ from country to country.
• Weight according to EPTA-Procedure 01/2014
SAFETY WARNINGS
General power tool safety warnings
WARNING: Read all safety warnings, instruc-
tions, illustrations and specications provided
with this power tool. Failure to follow all instructions
listed below may result in electric shock, re and/or
serious injury.
Save all warnings and instruc-
tions for future reference.
The term "power tool" in the warnings refers to your mains-operated
(corded) power tool or battery-operated (cordless) power tool.
Work area safety
1. Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
2.
Do not operate power tools in explosive atmospheres, such
as in the presence of ammable liquids, gases or dust. Power
tools create sparks which may ignite the dust or fumes.