Use and Care Manual

WARNING: After setting the blade for a bevel
cut, ensure that the carriage and blade will have
intended cut before operating the tool.
WARNING: While making a bevel cut keep
hands out of the path of the blade.
WARNING: The blade should not be raised
NOTICE:
pressure in parallel with the blade.
wait until the blade has come to a complete stop
Cutting base boards
CAUTION:
vise (optional accessory) when cutting the base
board.
CAUTION:
thickness 20 mm (13/16″) or thinner, make sure to
use a spacer block to secure the workpiece.
1
2
3