SDS

2
CONTINUED: SECTION 3. COMPOSITION, INFORMATION OR INGREDIENTS:
Outer case
Aluminum, iron, aluminum
laminated plastic
7429-90-5
7439-89-6
1~30
*1 Not every product includes all of these materials
*2 The letter M means transition metal and candidates of M are Co, Mn, Ni and Al. One compound includes one or more of
these metals and one product include one or more of the compounds. The letter M and N means the number of atoms.
SECTION 4. FIRST AID MEASURE:
Spilled internal cell materials
Inhalation:
Make the victim blow his/her nose, gargle. Seek medical attention if necessary.
Skin contact:
Remove contaminated clothes and shoes immediately. Wash extraneous matter or contact region with soap and plenty of
water immediately.
Eye contact:
Do not rub one’s eye. Immediately flush eyes with water continuously for at least 15 minutes. Seek medical attention
immediately.
A battery cell and spilled internal cell materials
Ingestion:
Wash out mouth thoroughly. Do not make the victim vomit, unless instructed by medical personnel. Seek medical
attention immediately.
SECTION 5. FIRE FIGHTING MEASURES:
Suitable extinguishing media:
Plenty of water, carbon dioxide gas, nitrogen gas, chemical powder fire
extinguishing medium and fire foam.
Specific hazards:
Corrosive gas may be emitted during fire.
Specific methods of fire-fighting:
When the battery burns with other combustibles simultaneously, take fire-
extinguishing method which correspond to the combustibles. Extinguish a fire from
the windward as much as possible.
Special protective equipment for
firefighters:
Refer to Section 8-EXPOSURE CONTROLS I PERSONAL PROTECTION
(WHEN THE ELECTROLYTE LEAKS)
SECTION 6. ACCIDENTAL RELEASE MEASURES:
Spilled internal cell materials, such as electrolyte leaked from a battery cell, are carefully dealt with according to the followings.
Precautions for human body: Remove spilled materials with protective equipment (refer to Section 8-EXPOSURE
CONTROLS I PERSONAL PROTECTION (WHEN THE ELECTROLYTE LEAKS)). Do not
inhale the gas as much as possible. Moreover, avoid touching with as much as possible.
Environmental precautions:
Do not throw out into the environment.
Method of cleaning up:
The spilled solids are put into a container. The leaked place is wiped off with dry cloth.
Prevention of secondary hazards:
Avoid re-scattering. Do not bring the collected materials close to fire.