Use and Care Manual

12 ENGLISH
Installing the shear blades
1. Preparethecrank,undercover,andnewshear
blades.
1 2
3
►1. Crank 2. Undercover 3. Shear blades
2. Attachthebladecovertotheshearblades.
3. Adjustthethreepinssothattheyarelinedupon
the alignment line.
1
►1.Alignmentline
4. Applyasmallamountofgreasetotheperiphery
ofthecrank.Attachthecranktothepinswiththesmall
and large rounds facing down.
1
►1. Crank
5. Slide the shear blades so that the hole on the
base plate is positioned at the center of the rings of the
blades.
6. Turntheshearbladesupsidedownandinstall
themsothatthepinonthetooltsintheholeonthe
shear blades. Insert the claw of the base plate into the
groove on the tool. Make sure that the shear blades are
xedsecurelyinplace.
1
►1. Claw
7. Tightenthetwoscrewsrmlywithascrewdriver.