User Manual
11 ENGLISH
ROTARY HAMMER SAFETY
WARNINGS
1. Exposure to noise can
cause hearing loss.
2.
tool.
3.
-
ing or its own cord. Cutting accessory contacting
a "live" wire may make exposed metal parts of the
power tool "live" and could give the operator an
electric shock.
1.
At higher
speeds, the bit is likely to bend if allowed to rotate
freely without contacting the workpiece, resulting
2.
Bits can
bend, causing breakage or loss of control, result-
1.
-
2.
3.
4. In cold weather or when the tool has not been
5.
sure no one is below when using the tool in
high locations.
6.
7.
8.
9.
10.
11.
-
12.
SAVE THESE INSTRUCTIONS.
WARNING:
FUNCTIONAL
DESCRIPTION
CAUTION:
Switch action
CAUTION:
released.
To start the tool, simply pull the switch trigger. Tool
speed is increased by increasing pressure on the switch
trigger. Release the switch trigger to stop.
Fig.1: 1. Switch trigger
For HR3011FC, HR3012FC only
CAUTION:
To turn on the lamp, pull the switch trigger. Release the
Fig.2: 1. Lamp
NOTE:
the lamp. Be careful not to scratch the lens of lamp, or
it may lower the illumination.
Reversing switch action
CAUTION:
CAUTION:
Changing the
direction of rotation before the tool stops may dam-
age the tool.
NOTICE: When changing the direction of rota-
side or B side. Otherwise, when the switch trigger is
pulled, the motor may not rotate or the tool may not
work properly.
This tool has a reversing switch to change the direc-
tion of rotation. Move the reversing switch lever to the
position A side for clockwise rotation or to the position B
side for counterclockwise rotation.
Fig.3: 1. Reversing switch lever