User Manual

6 ENGLISH

►1. Screw 2. Lock pin

2. Removethelockpin,andthenremovethescrew

and the blade.

3. Attachthenewbladewithitsatsurfacefacingthe

tool,theninsertthelockpin,andthentightenthescrew

rmlytosecuretheblade.

►1. Blade 2. Screw 3. Lock pin

4. Remove the lock pin.

OPERATION

CAUTION: When operating the tool, do not

touch the blade or bring the tool near the hand

or face.

CAUTION: When cutting the material, never

put the hand in front of the blade.

NOTICE: Before operating the tool, make sure

that the blades are in the right position as shown

in the gure.

Holdthetoolrmly.Turnonthetool,thensettheblade

againstthematerialtobecut,andthenmovethetool

forward.

NOTICE: Do not apply excessive force to the

tool. It does not help to cut the material smoothly.

NOTE:Whencuttingthethinmaterialsuchasfabric,

applysufcienttensiontothematerialwhileholdingit

and move the tool slowly.

Whencuttingadisc(CD,DVD,orBlu-rayDisc),tiltitas

shownintheguretocutitsmoothly.