Manual

An adapter Fig. "B" and "C= is available for connecting Fig. "A_ type plugs to two- prong
receptacles. The green-colored rigid ear, lug, etc., extending from the adapter must be con-
nected to a permanent ground, such as a properly grounded outlet box.
Blade
_Cover of Grounde_'_
OutletBox
Adapter
GroundingMeans
Fig. A Fig. B Fig, C
SPECIFIC SAFETY RULES
use013-3
DO NOT let comfort or familiarity with product (gained from
repeated use) replace strict adherence to router safety rules. If
you use this tool unsafely or incorrectly, you can suffer serious
personal injury.
1. Hold tool by insulated gripping surfaces 6.
when performing an operation where the
7.
cutting tool may contact hidden wiring or
its own cord. Contact with a =live" wire will 8.
make exposed metal parts of the tool "rive"
and shock the operator. 9.
2. Wear hearing protection during extended
period of operation.
3. Handle the bits very carefully.
4, Check the bit carefully for cracks or dam-
age before operation. Replace cracked or
damaged bit immediately.
5, Avoid cutting nails. Inspect for and
remove all nails from the workplace
before operation.
10.
Hold the tool firmly with both hands.
Keep hands away from rotating parts.
Make sure the bit Is not contacting the
workplace baron= the switch is turned on.
Before using the tool on an actual work-
piece, let it run for a while, Watch for
vibration or wobbling that could indicate
improperly Installed bit.
Be careful o4=the hit rotating direction and
the feed direction.
11. Do not leave the tool running. Operate the
tool only when hand-held.
12. Always switch off and walt for the bit to
come to a complete stop before removing
the tool from workplace.