Use and Care Manual

6 ENGLISH
PARTS DESCRIPTION
Parts description (with nylon cutting
head)
1
2
3
4
5
6
7
8
9
10
12
11
1 Switch trigger 2 Battery cartridge
3 Lock lever 4 Protector
5 Nylon cutting head 6 Nylon cord
7 Wire guard 8 Thumb nut
9 Front grip 10 Hanger for shoulder
harness
11 Indication lamp 12 Lock-off button
Parts description (with plastic blade)
1
2
4
5
6
7
8
9
10
3
11
12
13
1 Switch trigger 2 Battery cartridge
3 Blade holder 4 Lock lever
5 Protector 6 Plastic blade head
7 Plastic blade 8 Wire guard
9 Thumb nut 10 Front grip
11 Hanger for shoulder
harness
12 Indication lamp
13 Lock-off button - -
FUNCTIONAL
DESCRIPTION
WARNING: Always be sure that the tool is
switched off and the battery cartridge is removed
before adjusting or checking function on the tool.
Failure to switch off and remove the battery cartridge
may result in serious personal injury from accidental
start-up.
Installing or removing battery
cartridge
CAUTION: Always switch off the tool before
installing or removing of the battery cartridge.
CAUTION: Hold the tool and the battery car-
tridge rmly when installing or removing battery
cartridge. Failure to hold the tool and the battery
cartridge rmly may cause them to slip off your hands
and result in damage to the tool and battery cartridge
and a personal injury.
1
2
3
► 1. Red indicator 2. Button 3. Battery cartridge
To remove the battery cartridge, slide it from the tool
while sliding the button on the front of the cartridge.
To install the battery cartridge, align the tongue on the
battery cartridge with the groove in the housing and slip
it into place. Insert it all the way until it locks in place
with a little click. If you can see the red indicator on the
upper side of the button, it is not locked completely.
CAUTION: Always install the battery cartridge
fully until the red indicator cannot be seen. If not,
it may accidentally fall out of the tool, causing injury to
you or someone around you.
CAUTION: Do not install the battery cartridge
forcibly. If the cartridge does not slide in easily, it is
not being inserted correctly.