User Manual

5 ENGLISH
ENGLISH (Original instructions)
SPECIFICATIONS
Model: SD100D
Length of stroke 6 mm
Strokes per minute 0 - 6,000 min
-1
Maximum cutting capacities Drywall 30 mm
Wood 15 mm
Rated voltage D.C. 10.8 V
Standard battery cartridges BL1015, BL1020B BL1040B
Overall length 239 mm 248 mm
Net weight 1.5 kg 1.6 kg
• Duetoourcontinuingprogramofresearchanddevelopment,thespecicationshereinaresubjecttochange
without notice.
• Specicationsandbatterycartridgemaydifferfromcountrytocountry.
• Weight,withbatterycartridge,accordingtoEPTA-Procedure01/2003
Intended use
Thistoolisintendedforplunge-cuttingofadrywall.
Wood can also be cut by installing a suitable saw blade.
Noise
ThetypicalA-weightednoiseleveldeterminedaccord-
ing to 60745-2-11:
Sound pressure level (L
pA
):77dB(A)
Uncertainty(K):3dB(A)
Thenoiselevelunderworkingmayexceed80dB(A).
WARNING: Wear ear protection.
Vibration
Thevibrationtotalvalue(tri-axialvectorsum)deter-
mined according to 60745-2-11:
Work mode: cutting drywall (thickness 30 mm)
Vibration emission (a
h
):3.0m/s
2
Uncertainty(K):1.5m/s
2
Work mode: cutting chip board (thickness 15 mm)
Vibration emission (a
h
):5.5m/s
2
Uncertainty(K):1.5m/s
2
NOTE:Thedeclaredvibrationemissionvaluehas
been measured in accordance with the standard test
method and may be used for comparing one tool with
another.
NOTE:Thedeclaredvibrationemissionvalue
may also be used in a preliminary assessment of
exposure.
WARNING:Thevibrationemissionduringactual
use of the power tool can differ from the declared
emission value depending on the ways in which the
tool is used.
WARNING: Be sure to identify safety measures
to protect the operator that are based on an estima-
tion of exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it is
running idle in addition to the trigger time).
EC Declaration of Conformity
For European countries only
TheECdeclarationofconformityisincludedasAnnexA
to this instruction manual.
SAFETY WARNINGS
General power tool safety warnings
WARNING: Read all safety warnings, instruc-
tions, illustrations and specications provided
with this power tool. Failure to follow all instructions
listedbelowmayresultinelectricshock,reand/or
seriousinjury.
Save all warnings and instruc-
tions for future reference.
Theterm"powertool"inthewarningsreferstoyour
mains-operated (corded) power tool or battery-operated
(cordless) power tool.