Operation Manual

| 64 |
EN
 
a) 

The correct power tool will do the job better and
safer at the rate for which it was designed.
b) 

Any power tool that cannot be controlled with the
switch is dangerous and must be repaired.
c) 



Such preventive safety measures reduce the
risk of starting the power tool accidentally.
d) 



Power tools are dangerous in the hands of
untrained users.
e) 





Many accidents are caused by poorly
maintained power tools.
f) 
Properly maintained cutting tools with sharp
cutting edges are less likely to bind and are
easier to control.
g) 



Use of the power tool for operations different
from those intended could result in a hazardous
situation.
 
a) 


This will ensure that the safety of the power tool
is maintained.
 


a) 





The guard helps to protect operator from broken
wheel fragments and accidental contact with
wheel.
b) 

Just because an accessory can be attached
to your power tool, it does not assure safe
operation.
c) 


Accessories running faster than their rated
speed can break and fly apart.
d) 


Abrasive cut-off wheels are intended for
peripheral grinding, side forces applied to these
wheels may cause them to shatter.
e) 


Proper wheel flanges support the wheel thus
reducing the possibility of wheel breakage.
f) 


Incorrectly sized accessories cannot be
adequately guarded or controlled.
g) 

Wheels and flanges with arbour holes that do
not match the mounting hardware of the power
tool will run out of balance, vibrate excessively
and may cause loss of control.
h) 








Damaged wheels will normally break apart
during this test time.