Use and Care Manual

Message Codes
Mes sag eCo de s
Makita SK105D/SK105GD
13
Laser LED Cause Correction
ON Lights green Normal -
ON Blinks green Normal, laser set at reduced
brightness
OK - or press ON / Set key for 2
seconds to get strong laser beam
ON Lights red Instrument is at low power Change power supply
OFF Lights red 5 seconds then OFF Battery empty Change power supply
OFF Blinks red Temperature alert Cool down - or
heat up instrument
Blinks Lights red Instrument is out of self-levelling
and instrument is at low power
Change power supply
Blinks Blinks red Instrument is out of self-levelling Position the instrument almost
horizontal
Blinks every 5 seconds Lights red Levelling lock is activated and
instrument is at low power
Change power supply
Blinks every 5 seconds Lights green Normal, levelling lock is activated -
Blinks every 5 seconds Blinks green Levelling lock is activated and
laser set at reduced brightness
-