Use and Care Manual

16 ENGLISH

Using the USB adapter (optional accessory)

1. Make sure that the product is turned OFF and remove the DC jack cover.

Then, connect the DC jack plug of the power supply cable to the DC jack.

2. Connect the battery to the USB adapter.

3. Turn the power switch on the USB adapter ON, then turn the power

switch on this product ON.

* When using the USB adapter with a tripod (optional

accessory), install the hand strap (optional accessory) on

the USB adapter. With the tripod xing screw rmly xed

in place, hook the hand strap onto the xing screw as

shown in the gure. If the xing screw is loose, the USB

adapter might fall, and this might cause it to malfunction,

break the power supply cable or cause the USB terminals

or DC jack to malfunction.

1: Fixing screw

2: Hand strap

3: Tripod

4: Battery

5: USB adapter

6: Power supply cable

NOTICE

• The battery cannot be charged by the USB adapter.

• Before using the USB adapter, read its instruction manual.

1: DC jack cover

1: DC jack

2: DC jack plug