Use and Care Manual

Operations
Functions with locked levelling
Activate levelling lock and press ON/OFF button
for tilt applications.
Switching brightness selection
l 1x: smaller line width
l 2x: smallest line width
l 3x: standard line width
Saving operating mode
Place the lock switch to the unlocked position (see
Levelling lock). To save the favourite operating
mode, press and hold the ON/OFF button and
brightness button during operation for 2 sec. The
status LED blinks 3 times in green colour. The
instrument has stored the line beam mode and
brightness to the memory and as the new default
mode. To reset the line beam mode and bright-
ness to factory settings, press and hold the
ON/OFF button and brightness button during
operation for 5 sec and wait until the status LED
blinks 3 times in red colour.
2 sec = save actual line beam mode and bright-
ness
5 sec = reset to factory settings
Makita SK700D/SK700GD
11