SDS

3
CONTINUED: SECTION 8. EXPOSURE CONTROLS AND PERSONAL PROTECTION
Low Smoke Additive Low Smoke Additive Non-Hazardous Non- Hazardous
N,N'-di-sec-butyl-p-phenylenediamine Fuel Stabilizer OSHA/ACGIH Not established
Ventilation Procedure: Ventilate as needed to comply with exposure limit.
Gloves Protection: Use impervious gloves to avoid repeated/prolonged skin contact.
Eye Protection: Use goggles/face shield to avoid eye contact.
Work/Hygienic Practices: If clothing becomes contaminated, change to fresh clean clothing. Do not wear until thoroughly laundered.
SECTION 9. PHYSICAL AND CHEMICAL PROPERTIES
Vapor Pressure (mmHg) at 20
o
C: 1
Specific Gravity at 60
o
F: 0.87
Water Solubility: Negligible
Boiling Point: Not determined
Vapor Density (Air=1): > 1
Evaporation Rate (BUAC=1): < 1
Odor: Mild Petroleum Odor
Appearance: Dark Green/Blue Color Liquid
Viscosity at 100
o
C CST: 7.2
V.O.C.: 171 – 209 g/L
Flash Point: >210
o
F
Fire Point: 240
o
F
SECTION 10. STABILITY AND REACTIVITY
Stability: Stable
Incompatibility: Avoid strong oxidants
Polymerization: Will not occur
Thermal Decomposition: Partial burning produces fumes, smoke and carbon monoxide
SECTION 11. TOXICOLOGICAL INFORMATION
Distillates (petroleum), hydro treated light:
ORAL (LD50): Acute: >5000 mg/kg [Rat].
DERMAL (LD50): Acute: >2000 mg/kg [Rabbit].
Studies on laboratory animals have associated similar materials with eye and respiratory tract irritation. Repeated exposure to elevated
concentrations of hydrocarbon solvents can produce a variety of transient CNS effects (e.g., dizziness, headache, narcosis, etc). Studies
on laboratory animals have shown similar materials to cause skin irritation after repeated or prolonged contact.