Operation Manual

4 ENGLISH
ENGLISH (Original instructions)
SPECIFICATIONS
Model: TM30D
Oscillation per minute 6,000 - 20,000 min
-1
Oscillation angle, left/right 1.6° (3.2° total)
Rated voltage D.C. 10.8 V
Battery cartridge BL1015, BL1020B BL1040B
Overall length 277 mm 296 mm
Net weight without dust extraction
attachment
1.1 kg 1.2 kg
with dust extraction
attachment
1.2 kg 1.3 kg
• Duetoourcontinuingprogramofresearchanddevelopment,thespecicationshereinaresubjecttochange
without notice.
• Specicationsandbatterycartridgemaydifferfromcountrytocountry.
• Weight,withbatterycartridge,accordingtoEPTA-Procedure01/2003
Intended use
Thetoolisintendedforsawingandcuttingwood,
plastic, gypsum, non-ferrous metals, and fastening
elements (e. g. unhardened nails and staples). It is also
intended for working soft wall tiles, as well as dry sand-
ing and scraping of small surfaces. It is especially for
workingclosetoedgeandushcutting.
Noise
ThetypicalA-weightednoiseleveldeterminedaccord-
ingtoEN60745:
Workmode:Sanding
Soundpressurelevel(L
pA
):75dB(A)
Uncertainty(K):3dB(A)
Thenoiselevelunderworkingmayexceed80dB(A).
Workmode:Cuttingwithplungecutsawblade
Soundpressurelevel(L
pA
):82dB(A)
Soundpowerlevel(L
WA
):93dB(A)
Uncertainty(K):3dB(A)
Workmode:Cuttingwithsegmentalsawblade
Soundpressurelevel(L
pA
):81dB(A)
Soundpowerlevel(L
WA
):92dB(A)
Uncertainty(K):3dB(A)
Workmode:Scraping
Soundpressurelevel(L
pA
):81dB(A)
Soundpowerlevel(L
WA
):92dB(A)
Uncertainty(K):3dB(A)
WARNING: Wear ear protection.
Vibration
Thevibrationtotalvalue(tri-axialvectorsum)deter-
minedaccordingtoEN60745:
Workmode:Sanding
Vibrationemission(a
h
):2.5m/s
2
or less
Uncertainty(K):1.5m/s
2
Workmode:Cuttingwithplungecutsawblade
Vibrationemission(a
h
):10.5m/s
2
Uncertainty(K):1.5m/s
2
Workmode:Cuttingwithsegmentalsawblade
Vibrationemission(a
h
):5.5m/s
2
Uncertainty(K):1.5m/s
2
Workmode:Scraping
Vibrationemission(a
h
):9.0m/s
2
Uncertainty(K):1.5m/s
2
NOTE:Thedeclaredvibrationemissionvaluehas
beenmeasuredinaccordancewiththestandardtest
methodandmaybeusedforcomparingonetoolwith
another.
NOTE:Thedeclaredvibrationemissionvalue
mayalsobeusedinapreliminaryassessmentof
exposure.
WARNING:Thevibrationemissionduringactual
use of the power tool can differ from the declared
emission value depending on the ways in which the
tool is used.
WARNING: Be sure to identify safety measures
toprotecttheoperatorthatarebasedonanestima-
tion of exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it is
running idle in addition to the trigger time).
EC Declaration of Conformity
For European countries only
MakitadeclaresthatthefollowingMachine(s):
DesignationofMachine:CordlessMultiTool
ModelNo./Type:TM30D
ConformstothefollowingEuropeanDirectives:
2006/42/EC
Theyaremanufacturedinaccordancewiththefollowing
standardorstandardizeddocuments:EN60745
Thetechnicalleinaccordancewith2006/42/ECis
availablefrom:
Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium
24.9.2015