User Manual

3
ENGLISH (Original instructions)
Explanation of general view
1-1. Button
1-2. Red indicator
1-3. Battery cartridge
2-1. Star marking
3-1. Indicator lamps
3-2. Check button
4-1. Slide switch
5-1. Dial
6-1. Indication lamp
7-1. Holder bolt
7-2. Lock lever
8-1. Holder bolt
8-2. Holes in the application tool
8-3. Protrusions of the tool flange
10-1. Adapter
SPECIFICATIONS
Model DTM41 DTM51
Oscillation per minute 6,000 - 20,000 (min
-1
)
Oscillation angle, left/right 1.6 ﾟ (3.2 ﾟ total)
Standard battery cartridge
BL1430 /
BL1440 /
BL1450
BL1415 * /
BL1415N *
BL1830 /
BL1840 / BL1840B /
BL1850 / BL1850B
BL1815 * /
BL1815N * /
BL1820 * /
BL1820B *
Overall length 340 mm 326 mm 340 mm 326 mm
without dust extraction attachment 2.1 kg 2.0 kg 2.2 kg 2.0 kg
Net weight
with dust extraction attachment 2.2 kg 2.1 kg 2.3 kg 2.1 kg
Rated voltage D.C. 14.4 V D.C. 18 V
* NOTE: For continuous operation, high capacity battery cartridge, BL1430, BL1440, BL1450, BL1830, BL1840, BL1840B, BL1850
and BL1850B are recommended.
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
ENE080-1
Intended use
The tool is intended for sawing and cutting wood, plastic,
gypsum, non-ferrous metals, and fastening elements (e.
g. unhardened nails and staples). It is also intended for
working soft wall tiles, as well as dry sanding and
scraping of small surfaces. It is especially for working
close to edge and flush cutting.
ENG905-1
Noise
The typical A-weighted noise level determined
according to EN60745:
Work mode: Sanding
Model DTM41
Sound pressure level (L
pA
) : 76 dB (A)
Uncertainty (K) : 3 dB (A)
The noise level under working may exceed 80 dB (A).
Model DTM51
Sound pressure level (L
pA
) : 77 dB (A)
Uncertainty (K) : 3 dB (A)
The noise level under working may exceed 80 dB (A).
Work mode: Cutting with plunge cut saw blade
Model DTM41
Sound pressure level (L
pA
) : 80 dB (A)
Sound power level (L
WA
) : 91 dB (A)
Uncertainty (K) : 3 dB (A)
Model DTM51
Sound pressure level (L
pA
) : 81 dB (A)
Sound power level (L
WA
) : 92 dB (A)
Uncertainty (K) : 3 dB (A)
Work mode: Cutting with segmental saw blade
Model DTM41
Sound pressure level (L
pA
) : 77 dB (A)
Uncertainty (K) : 3 dB (A)
The noise level under working may exceed 80 dB (A).
Model DTM51
Sound pressure level (L
pA
) : 76 dB (A)
Uncertainty (K) : 3 dB (A)
The noise level under working may exceed 80 dB (A).