Instruction manual

Operation

Since you have performed all the preparations, the brushcutter

can now be put into operation.

The brushcutter is not allowed to be star-

ted until it has been completely assem-

bled (see chapter "Preparations") and a

functional test has been carried out!

Observe the accident prevention regulations!

For all work performed with the brushcutter:

Wear protective gloves!

Wear safety shoes!

Wear a helmet as well as face, eye and hearing

protection!

Never work alone. In case of emergencies,

another person must be within shouting

distance. Before beginning to work, in-

form the other person about the protective

devices available on the machine!

The cutting tool must be equipped with the

appropriate cutter guard. Never operate the

machine without the cutter guard.

In the case of noticeable changes in the behavior

of the machine, turn off the engine immediate-

ly.

If the cutting tool comes into contact with stones

or other hard objects, turn off the engine imme-

diately and check the cutting tool.

Checking the reliable operating condition of the

brushcutter

Before starting the brushcutter, always make sure that

• the cutting tool (

1) ts rmly.

• upon being released, the throttle lever (

2) returns to zero

position automatically.

• the safety locking button (

3) is functioning.

If the safety locking button (3) is not pressed, it

must also not be possible to press the throttle

lever (2) all the way down.

• the start-stop switch (

4) (short-circuit switch) is functioning.

• the handles (

5) are clean and dry.

• the cutter guard (

6) has not been damaged and is rmly

installed in correct position.