User manual

8
ENGLISH (Original instructions)
Explanation of general view
SPECIFICATIONS
• Due to our continuing program of research and development, the specifications herein are subject to change without
notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
Symbol
END218-7
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
...... Read instruction manual and follow the
warnings and safety instructions.
...... Wear eye protection.
....... Wear ear protection.
............... DOUBLE INSULATION
.................. Caution: particular care and attention
required!
.................. Caution: withdraw the mains plug
immediately if the cable is damaged!
................. Caution: kickback!
................ Protect against rain and damp!
................. Wear a helmet, goggles and ear
protection!
................. Wear safety gloves!
................. Withdraw the mains plug!
.................. First aid
......... Maximum permissible length of cut
......... Direction of chain travel
................... Chain oil
.......... Chain brake released
.......... Chain brake applied
................. Prohibited!
1. Chain brake applied
2. Chain brake released
3. Rear handle
4. Switch trigger
5. Oil filler cap
6. Front handle
7. Front hand guard
8. Guide bar
9. Saw chain
10. Lever
11. Sprocket cover
12. Adjusting dial
13. Rear hand guard
14. Oil level sight
15. Spike bumper
16. Lock-off button
17. Chain catcher
18. Guide bar cover
19. Cord hook
20. Adjusting screw for oil pump
(at the bottom)
21. Sprocket
22. Hole
23. Hook
24. Pin
25. Loosen
26. Tighten
27. Tool’s cord
28. Extension cord
29. Plug and socket (the shape may
differ from country to country)
30. Strap
31. Lock
32. Unlock
33. Felling area
34. Felling direction
35. Danger zone
36. Escape route
37. Cutter length
38. Distance between cutting edge and
depth gauge
39. Minimum 3 mm
40. Side plate angle
41. Oil guide groove
42. Oil feed hole
Model UC3041A UC3541A UC4041A
Max. chain speed 14.5 m/s (870 m/min)
Standard guide bar
Bar length 300 mm 350 mm 400 mm
Cutting length 265 mm 325 mm 360 mm
Guide bar type Sprocket nose bar
Standard saw chain
Type 90PX 91PX 90PX 91PX 90PX 91PX
Pitch 3/8”
No. of drive links 46 52 56
Recommended guide bar length 300 - 400 mm
Overall length (without guide bar) 455 mm
Net weight 4.6 kg 4.7 kg 4.7 kg
Extension cable (optional) DIN 57282/HO 7RN -F L = 30 m max., 3 x 1.5 mm
2