Operation Manual

6
ENGLISH (Original instructions)
Explanation of general view
SPECIFICATIONS
• Due to our continuing program of research and development, the specifications herein are subject to change without
notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Symbol
END013-4
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
....... Read instruction manual.
..................... Do not expose to rain.
............... Only for EU countries
Do not dispose of electric equipment
or battery pack together with
household waste material!
In observance of the European
Directives, on Waste Electric and
Electronic Equipment and Batteries
and Accumulators and Waste
Batteries and Accumulators and their
implementation in accordance with
national laws, electric equipment and
batteries and battery pack(s) that
have reached the end of their life
must be collected separately and
returned to an environmentally
compatible recycling facility.
Intended use
ENE014-1
The tool is intended for trimming hedges.
General Power Tool Safety
Warnings GEA010-1
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and
instructions for future reference.
CORDLESS HEDGE TRIMMER
SAFETY WARNINGS
GEB062-5
1. Keep all parts of the body away from the cutter
blade. Do not remove cut material or hold material
to be cut when blades are moving. Make sure the
switch is off when clearing jammed material. A
moment of inattention while operating the hedge
trimmer may result in serious personal injury.
2. Carry the hedge trimmer by the handle with the
cutter blade stopped. When transporting or
storing the hedge trimmer always fit the cutting
device cover. Proper handling of the hedge trimmer
will reduce possible personal injury from the cutter
blades.
3. Hold the power tool by insulated gripping surfaces
only, because the cutter blade may contact hidden
wiring. Cutter blades contacting a “live” wire may
make exposed metal parts of the power tool “live” and
could give the operator an electric shock.
4. Do not use the hedge trimmer in the rain or in wet or
very damp conditions. The electric motor is not
waterproof.
5. First-time users should have an experienced hedge
trimmer user show them how to use the trimmer.
6. The hedge trimmer must not be used by children or
young persons under 18 years of age. Young persons
over 16 years of age may be exempted from this
1. Red indicator
2. Button
3. Battery cartridge
4. Switch trigger A
5. Switch trigger B
6. Lock-off button
7. Indication lamp
8. Trimming direction
9. Hedge surface to be trimmed
10. Tilt the blades
11. String
12. Press
13. Chip receiver
14. Nut
15. Shear blade
16. Hooks
17. Fit the hooks into groove
18. Grooves
19. Press the levers on both sides
20. Unlock the hooks
21. Screws
22. Under cover
23. Sponge
24. Washer
25. Gear
26. Sleeves
27. Groove
28. Blade cover
29. Grease
30. Blade
Model UH420D UH480D UH482D UH520D UH522D
Blade length 420 mm 480 mm 480 mm 520 mm 520 mm
Strokes per minute (min
-1
)1,350
Overall length 823 mm 873 mm 879 mm 923 mm 929 mm
Net weight 2.9 kg 3.0 kg 3.0 kg 3.0 kg 3.1 kg
Rated voltage D.C.14.4V D.C.18V D.C.14.4V D.C.18V
Cd
Ni-MH
Li-ion